5-axis vice, D=12, H=175 *

Material:
Base plate and jaw, case-hardened steel.
Support bars in steel.
Jaws in special steel.
Clamping pin, tool steel.
Version:
Burnished base plates and jaws.
Hardened support bars, with surface without corrosion protection.
Clamping jaws with surface without corrosion protection.
Hardened clamping pin without corrosion protection.
Order example:
K0939.4012175
Note:
Vice with 5 spindles for mounting on clamping plates. The clamping system allows machining of 5 sides without interfering edges, with a clamping depth of only 8 mm. With this clamping system, clamping distances between 22 - 236 mm are possible, which can be extended as desired by means of the extension shafts K0947, available as an option.
By mounting a tension spindle directly below the support base for workpieces, a tensile force of up to 42 kN is exerted on the workpiece, which is not lost due to bending. The use of clamping pins with a 4 mm tip ensures a
form-fit clamping without prior stamping.
For fastening the toggle clamp to the perforated clamping plate, adjusting screws K0815. are recommended
Included in the clamping set for each (1) axis: extensions L = 60 mm and L = 120 mm.

* The clamping height can be increased with height adapters K0941 and support bars K0942.
Accessories:
Stop set K0948
Adjusting screws K0815