Adapter, Rotating, Antistatic, L=46, 1, B=88, H=40, B1=51, BN=8/10, Black polyamide

Material:
Antistatic adapter in PA, carbon fibre reinforced.
Zinc die-cast fastener.
Fastening material in steel.
Version:
Zinc-plated steel.
Order example:
K1630.511
Note:
The adapters can be used to fasten organiser boxes in a profile slot (8 slot or 10 slot).
The adapter 45° can be rotated in both directions.
Application:
Sensitive electrical and electronic components and equipment (ESD-sensitive components) can be damaged or even destroyed by electrostatic discharge in their vicinity (electrostatic discharge = ESD).
An electrostatic discharge can be caused by people or by handling ESD-sensitive components (e.g. during manufacturing, assembly, transport, storage, etc.).
To avoid electrostatic discharge, the use of electrically dissipative products in the electronic environment is required, which comply with DIN EN 61340-5-1.
These products are suitable for ESD applications and for ESD protected areas (EPA) in accordance with DIN EN 61340-5-1.
Scope of delivery:
1x adapter with upper housing.
1x adapter with lower housing.
1x adapter with flange.
1x hexagon nut M4.
1x countersunk head screw M4x35.
4x slot clamps 8/10.
1x cheese head screw M8x16.
Application:
Equipment manufacturers who must comply with the requirements of the "ATEX 2014/34 / EU" regulations.
Operators, who must comply with the requirements of the operating regulations "ATEX 1999/92/EG".
Safety:
These products with ESD characteristics are also suitable for use in equipment, components and protective systems installed in potentially explosive atmospheres.
By using these ESD products, discharge of an electrostatic spark and thus possible ignition of gases and dusts, which could lead to an explosion in enclosed spaces, is avoided.
To protect people working in potentially explosive environments, equipment manufacturers and operators are required to apply and comply with the "ATEX" regulations.