PAK2164.1
Adjustable friction joint, Single GR.40/40, I, NB=8 aluminium
Estimated delivery: On request
Material:
Housing: die-cast aluminium.
Inserts and friction shaft: steel.
Ring and cover caps: plastic.
Plates for clamping in slots: cast aluminium.
Screws, washers and T-nuts: steel.
Version:
Housing: powder-coated, aluminium colour.
Inserts and friction shaft: untreated surface.
Ring and cover caps: similar to RAL 7042.
Plates for clamping in slots: powder-coated, aluminium colour.
Screws, washers, T-nuts: zinc-plated.
Order example:
K2164.1
Note:
Friction articulated joints for the individual construction of swivel arms using aluminium profiles. Friction articulated joints are characterised by an adjustable friction torque. The frictional resistance can be adjusted continuously by means of an adjusting screw. Rotation of 360°. Profile size 40 mm.
The connection side can be screwed into the profile slot lengthwise or crosswise, so that the friction shaft is positioned perpendicular to the profile.
The articulation side can be fixed to the profile lengthwise, crosswise or frontally. For top mounting, a thread M8 must be provided (min. 15 mm deep) in the central bore. When mounting on flat surfaces, the supplied plates for clamping in slots can be omitted.
The maximum torque load M is 45 Nm.
Scope of delivery:
1 Friction joint
2 Cover caps
2 Screws DIN EN ISO 4762 (DIN 912) - M8x45 (for T-nut)
2 Screws DIN EN ISO 4762 (DIN 912) - M8x50 (for central bore)
2 Screws DIN EN ISO 4762 (DIN 912) - M8x35 (for locking)
2 Washers 8-FSt
2 Plates for slot fastening
2 T-nuts - Slot 8 - M8
Housing: die-cast aluminium.
Inserts and friction shaft: steel.
Ring and cover caps: plastic.
Plates for clamping in slots: cast aluminium.
Screws, washers and T-nuts: steel.
Version:
Housing: powder-coated, aluminium colour.
Inserts and friction shaft: untreated surface.
Ring and cover caps: similar to RAL 7042.
Plates for clamping in slots: powder-coated, aluminium colour.
Screws, washers, T-nuts: zinc-plated.
Order example:
K2164.1
Note:
Friction articulated joints for the individual construction of swivel arms using aluminium profiles. Friction articulated joints are characterised by an adjustable friction torque. The frictional resistance can be adjusted continuously by means of an adjusting screw. Rotation of 360°. Profile size 40 mm.
The connection side can be screwed into the profile slot lengthwise or crosswise, so that the friction shaft is positioned perpendicular to the profile.
The articulation side can be fixed to the profile lengthwise, crosswise or frontally. For top mounting, a thread M8 must be provided (min. 15 mm deep) in the central bore. When mounting on flat surfaces, the supplied plates for clamping in slots can be omitted.
The maximum torque load M is 45 Nm.
Scope of delivery:
1 Friction joint
2 Cover caps
2 Screws DIN EN ISO 4762 (DIN 912) - M8x45 (for T-nut)
2 Screws DIN EN ISO 4762 (DIN 912) - M8x50 (for central bore)
2 Screws DIN EN ISO 4762 (DIN 912) - M8x35 (for locking)
2 Washers 8-FSt
2 Plates for slot fastening
2 T-nuts - Slot 8 - M8
| Material | Aluminum |
|---|
| Tamanho | 40/40 |
|---|---|
| Versão 2 | simples |
| Versão 1 | regulável |
| Denominação | Junta articulada de fricção |
| Tipo | I |
| Largura de ranhura | 8 |
| M Nm | 45 |
Product Variations
| Model | Material | Tamanho | Versão 2 | Versão 1 | Denominação | Tipo | Largura de ranhura | M Nm | Stock | Quantity | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| PAK2164.1 PAK2164.1 | Aluminum | 40/40 | simples | regulável | Junta articulada de fricção | I | 8 | 45 | |||
PAK2164.1
Adjustable friction joint, Single GR.40/40, I, NB=8 aluminium
Material = Aluminum
Tamanho = 40/40
Versão 2 = simples
Versão 1 = regulável
Denominação = Junta articulada de fricção
Tipo = I
Largura de ranhura = 8
M Nm = 45