PAK1900.07382121
Adjustable hinge, Horizontal/vertical 76X60, Mounting perforations, Stainless steel A4 1.4401
Estimated delivery: On request
Material:
Stainless steel 1.4401.
Order example:
K1900.07382121
Note:
Hinges for inset doors.
The hinges can be installed on the right-hand and left-hand side.
The dots mark the centre of the adjustment travel "L", to facilitate mounting.
Manufacturing tolerances and door gaps can be compensated and readjusted horizontally and vertically.
The load values stated for the hinges are non-binding reference values and do not take safety factors into account, and therefore exclude any liability. The data stated are for information purposes and do not guarantee properties in a legal sense.
The load values were determined under laboratory conditions. The correct application of the hinges is the sole responsibility of the user.
Factors such as the wide variety of materials to which the hinges are fastened, the types of fastening, the climatic conditions and wear can influence the values determined.
Accessories:
Cheese head screws DIN 6912 (M6) K1160.
Stainless steel 1.4401.
Order example:
K1900.07382121
Note:
Hinges for inset doors.
The hinges can be installed on the right-hand and left-hand side.
The dots mark the centre of the adjustment travel "L", to facilitate mounting.
Manufacturing tolerances and door gaps can be compensated and readjusted horizontally and vertically.
The load values stated for the hinges are non-binding reference values and do not take safety factors into account, and therefore exclude any liability. The data stated are for information purposes and do not guarantee properties in a legal sense.
The load values were determined under laboratory conditions. The correct application of the hinges is the sole responsibility of the user.
Factors such as the wide variety of materials to which the hinges are fastened, the types of fastening, the climatic conditions and wear can influence the values determined.
Accessories:
Cheese head screws DIN 6912 (M6) K1160.
| Material | Stainless steel 316 |
|---|
| A6 | 10 |
|---|---|
| A4 | 38 |
| Deslocamento L máx. | 4 |
| Modo de fixação | furos de fixação |
| H | 15 |
| B1 | 34 |
| A2 | 21 |
| A3 | 38 |
| A1 | 21 |
| A5 | 7 |
| A | 76 |
| B | 60 |
| Versão 1 | ajustável |
| Denominação | Dobradiça |
| Chave de aço | 1.4401 |
| Tipo de produto | Dobradiça |
| Tipo de forma | horizontal/vertical |
| Ângulo de abertura | 180° |
| S | 8 |
| F1 N | 9000 |
| F2 N | 1000 |
