Adjustable stop, With limit switch sensor TA.3, M12, Stainless steel

In addition to their mechanical function as a support element, adjustable stops with status sensor are used to detect whether or not a component is in contact with the stop.
The sensor detects whether the plunger is retracted or extended and allows this status information to be processed electronically.
Material:
Screw and tappet, stainless steel 1.4301.
Stainless steel guide bush 1.4112.
Stainless steel status sensor.

Version:
Screw, tappet, guide bush and condition sensor with untreated surface.
Order example:
K0581.080352
Note:
Switching occurs when the tappet is aligned with the contact surface of the guide bushes. The sensor is supplied disassembled.

Assembly recommendation: bonding, e.g. with Loctite 638.

Cable length: 0,3 metres.

Attention: screw the sensor in as far as the stop!
Application:
Stops with condition sensors allow status-dependent process control. It is possible to ensure that a workpiece or a moving component is in the desired position before proceeding to further steps.
Mounting:
The condition sensor must be screwed in all the way.
Bonding with Loctite 638, for example, is recommended.
Accessories:
Plug-in connector, female M8x1, with screw lock, unshielded K1874.
Technical data:
Inductive sensor:
Output circuit: PNP normally open contact (NO)
Operating voltage: 10 - 30 V DC
Operating current: 100 mA
Operating distance: 0,8 mm
Switching frequency: 5000 Hz
Short-circuit protection: yes
Reverse polarity protection: yes
Protection class: IP 67
Connection type: cable, 0,3 m, PUR, with plug connector
Temperature range: -25° C - +70°C
Approval: CE, c-UL-us, UKCA, WEEE
Safety:
Stops with condition sensors are not suitable for the protection of persons. Stops with condition sensors are not suitable for the protection of persons.
Drawing note:
1) Screw
2) Tappet
3) Guide bush
4) Status sensor
5) LED display

BN = brown
BK = black
BU = blue