PAK2035.0035152029
Adjusting plug with sliding surface, Style A round, D=35, L1=29, Black polyamide, For tubes
Estimated delivery: On request
Material:
Main body in polyamide.
Sliding surface in synthetic needle felt.
Version:
Main body: black.
Note:
The base must be adjusted without load.
The stated axial static load capacity refers to a screw unscrewed by 10 mm and completely flat.
The adjusting plugs are not suitable as load glides and are not intended for dynamic loads.
The lamellar shape of the nut can be closed or interrupted.
Application:
The adjusting plugs are used in steel tubes, tube caps or aluminium base frames in industry, trade and households. Particularly suitable for sensitive and hard floors, such as stone or laminate, to prevent scratches.
Mounting:
Assembly can be carried out manually by pressing in or by tapping with a dead-blow hammer.
Main body in polyamide.
Sliding surface in synthetic needle felt.
Version:
Main body: black.
Note:
The base must be adjusted without load.
The stated axial static load capacity refers to a screw unscrewed by 10 mm and completely flat.
The adjusting plugs are not suitable as load glides and are not intended for dynamic loads.
The lamellar shape of the nut can be closed or interrupted.
Application:
The adjusting plugs are used in steel tubes, tube caps or aluminium base frames in industry, trade and households. Particularly suitable for sensitive and hard floors, such as stone or laminate, to prevent scratches.
Mounting:
Assembly can be carried out manually by pressing in or by tapping with a dead-blow hammer.
| Material | Polyamide |
|---|---|
| Color | Black |
| Thread | M22 |
| H2 | 3 |
|---|---|
| SW | 28 |
| Capacidade de carga máx. kN (apenas com carga estática) | 3 |
| L | 29,3 |
| H | 5 |
| H1 | 5 |
| D | 35 |
| D2 | 25 |
| L1 | 29 |
| D1 | M22 |
| Adequado para | Ø35x1,5-2 |
| Forma | A |
| Versão 2 | para tubos redondos |
| Versão 1 | com superfície deslizante em f |
| Denominação | Tampão de ajuste |
| Tipo de forma | redondo |
