PAK2033.0080152040
Adjusting plug without insert, Style A round, D=80, L1=40 black polyamide, For round tubes
Estimated delivery: On request
Material:
Main body in polyamide.
Version:
Main body: black.
Note:
The base must be adjusted without load.
The stated axial static load capacity refers to a screw unscrewed by 10 mm and completely flat.
The adjusting plugs are not suitable as load glides and are not intended for dynamic loads.
The lamellar shape of the nut can be closed or interrupted.
Form A: from 60 mm with threaded nut fitted.
Application:
The adjusting plugs are used in steel tubes, tube caps or aluminium base frames in industry, trade and households. Suitable for hard and soft floors.
Mounting:
Assembly can be carried out manually by pressing in or by tapping with a dead-blow hammer.
Main body in polyamide.
Version:
Main body: black.
Note:
The base must be adjusted without load.
The stated axial static load capacity refers to a screw unscrewed by 10 mm and completely flat.
The adjusting plugs are not suitable as load glides and are not intended for dynamic loads.
The lamellar shape of the nut can be closed or interrupted.
Form A: from 60 mm with threaded nut fitted.
Application:
The adjusting plugs are used in steel tubes, tube caps or aluminium base frames in industry, trade and households. Suitable for hard and soft floors.
Mounting:
Assembly can be carried out manually by pressing in or by tapping with a dead-blow hammer.
| Material | Polyamide |
|---|---|
| Color | Black |
| Thread | S56 x 2 |
| SW | 74 |
|---|---|
| Capacidade de carga máx. kN (apenas com carga estática) | 3 |
| L | 34,7 |
| H | 6 |
| H1 | 10 |
| D | 80 |
| L1 | 40 |
| D1 | S56X2 |
| Adequado para | Ø80x1,5-2 |
| Forma | A |
| Versão 2 | para tubos redondos |
| Versão 1 | sem encaixe |
| Denominação | Tampão de ajuste |
| Tipo de forma | redondo |
