Antistatic handle, A=117, L=136, D=9, Black thermoplastic RAL9011

Material:
Reinforced thermoplastic PA (polyamide).
Version:
graphite black.
Order example:
K0190.111170824
Note:
The fixing hole is made in such a way that the handles can be fixed from the operating side by means of a cylinder head screw or a hexagon nut.
Application:
Sensitive electrical and electronic components and equipment (ESD-sensitive components) can be damaged or even destroyed by electrostatic discharge in their vicinity (electrostatic discharge = ESD).
An electrostatic discharge can be caused by people or by handling ESD-sensitive components (e.g. during manufacturing, assembly, transport, storage, etc.).
To avoid electrostatic discharge, the use of electrically dissipative products in the electronic environment is required, which comply with DIN EN 61340-5-1.
These products are suitable for ESD applications and for ESD protected areas (EPA) in accordance with DIN EN 61340-5-1.
Mounting:
From the operating side or from the rear.
Safety:
These products with ESD characteristics are also suitable for use in equipment, components and protective systems installed in potentially explosive atmospheres.
By using the ESD products, discharge of an electrostatic spark and thus possible ignition of gases and dusts, which could lead to an explosion in enclosed spaces, is avoided.
To protect people working in environments with potential explosion hazards, equipment manufacturers and operators are required to apply and comply with the "ATEX" regulations.

Target groups:
Equipment manufacturers who must comply with the requirements of the “ATEX 2014/34 / EU” regulations.
Operators, who must comply with the requirements of the operating regulations “ATEX 1999/92/EG”.