PAK1036.06
Automatic connector set D=10
Estimated delivery: On request
Material:
Steel.
Version:
zinc-plated part.
Order example:
K1036.06
Note:
Connector sets are suitable for connecting two aluminium profiles at a right angle. They allow free positioning of the profiles.
No machining of the profile is required. The connector is screwed into the profile slot from above (left-hand thread). The connector consists of a self-tapping thread. The use of lubricant is recommended.
Self-cutting connector sets must be applied in pairs, opposite each other.
Steel.
Version:
zinc-plated part.
Order example:
K1036.06
Note:
Connector sets are suitable for connecting two aluminium profiles at a right angle. They allow free positioning of the profiles.
No machining of the profile is required. The connector is screwed into the profile slot from above (left-hand thread). The connector consists of a self-tapping thread. The use of lubricant is recommended.
Self-cutting connector sets must be applied in pairs, opposite each other.
| Thread | 10 |
|---|
| D | 10 |
|---|---|
| L | 27 |
| SW | 4 |
| Largura de ranhura | 6 |
| Tipo | I |
| Versão 1 | automático |
| Denominação | Conjunto conector |
Product Variations
| Model | Thread | D | L | SW | Largura de ranhura | Tipo | Versão 1 | Denominação | Stock | Quantity | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| PAK1036.06 PAK1036.06 | 10 | 10 | 27 | 4 | 6 | I | automático | Conjunto conector | |||
| PAK1036.08 PAK1036.08 | 12 | 12 | 31 | 5 | 8 | I | automático | Conjunto conector | |||
PAK1036.06
Automatic connector set D=10
Thread = 10
D = 10
L = 27
SW = 4
Largura de ranhura = 6
Tipo = I
Versão 1 = automático
Denominação = Conjunto conector
PAK1036.08
Automatic connector set D=12
Thread = 12
D = 12
L = 31
SW = 5
Largura de ranhura = 8
Tipo = I
Versão 1 = automático
Denominação = Conjunto conector