PAK2328.1620
Ball lock pin, D=14, H=58, Untreated stainless steel, Components: stainless steel A2
Estimated delivery: On request
Material:
Stainless steel housing and pin 1.4305.
Stainless steel rotary knob 1.4301.
Version:
Untreated surface.
Note:
The M2 or M3 stainless steel fastening screws are included in the scope of delivery.
Mounting option 1 for plate thickness of 6 mm.
Mounting option 2 for plate thickness > 6 mm to 14 mm.
If the clamping force is exceeded, a gap of more than 0,1 mm forms between the panels.
Operating mode:
Make sure that the rotary knob is in the "OFF" position and that the pin is retracted.
Align the ball lock pin over the receiving bush or push it in. Press the button down and turn to the "ON" position.
Accessories:
Stainless steel receiving bushes with condition sensor K1843.
Receiving bushes for ball lock pin K1065.
Floating stainless steel receiving bushes for ball lock pin K2536.
Drawing note:
1) Mounting possibility 1
2) Mounting possibility 2
3) Plate
Stainless steel housing and pin 1.4305.
Stainless steel rotary knob 1.4301.
Version:
Untreated surface.
Note:
The M2 or M3 stainless steel fastening screws are included in the scope of delivery.
Mounting option 1 for plate thickness of 6 mm.
Mounting option 2 for plate thickness > 6 mm to 14 mm.
If the clamping force is exceeded, a gap of more than 0,1 mm forms between the panels.
Operating mode:
Make sure that the rotary knob is in the "OFF" position and that the pin is retracted.
Align the ball lock pin over the receiving bush or push it in. Press the button down and turn to the "ON" position.
Accessories:
Stainless steel receiving bushes with condition sensor K1843.
Receiving bushes for ball lock pin K1065.
Floating stainless steel receiving bushes for ball lock pin K2536.
Drawing note:
1) Mounting possibility 1
2) Mounting possibility 2
3) Plate
| Material | Stainless steel |
|---|---|
| Finishing | Natural |
| H2 | 43,5 |
|---|---|
| T | 6 |
| H | 58 |
| H1 | 6,5 |
| L2 | 19,5 |
| D | 14 |
| D3 | 28 |
| Força de retenção N | 90 |
| Força de aperto N | 30 |
| Constância térmica | ≤180 °C |
| D2 | 25 |
| L1 | 5,5 |
| D5 | 14 |
| D4 | 21 |
| D8 | 2,4 |
| D7 | 4,4 |
| D6 | 26 |
| T2 | 2,5 |
| T1 | 6-10 |
| D1 | 6 |
| M | M2x3 |
| Material dos componentes | aço inoxidável A2 |
| Denominação | Pino de bloqueio de esferas |
| Força de extração F kN | 0,5 |
| Cisalhamento kN | 3 |
| Superfície dos componentes | sem tratamento superficial |
Product Variations
| Model | Material | Finishing | H2 | T | H | H1 | L2 | D | D3 | Força de retenção N | Força de aperto N | Constância térmica | D2 | L1 | D5 | D4 | D8 | D7 | D6 | T2 | T1 | D1 | M | Material dos componentes | Denominação | Força de extração F kN | Cisalhamento kN | Superfície dos componentes | Stock | Quantity | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PAK2328.1620 PAK2328.1620 | Stainless steel | Natural | 43,5 | 6 | 58 | 6,5 | 19,5 | 14 | 28 | 90 | 30 | ≤180 °C | 25 | 5,5 | 14 | 21 | 2,4 | 4,4 | 26 | 2,5 | 6-10 | 6 | M2x3 | aço inoxidável A2 | Pino de bloqueio de esferas | 0,5 | 3 | sem tratamento superficial | |||
| PAK2328.11022 PAK2328.11022 | Stainless steel | Natural | 50 | 6 | 66 | 10 | 21,5 | 18 | 36 | 150 | 50 | ≤180 °C | 34 | 5,5 | 18 | 28 | 3,4 | 6,5 | 35 | 2,5 | 6-14 | 10 | M3x4 | aço inoxidável A2 | Pino de bloqueio de esferas | 1,5 | 9 | sem tratamento superficial | |||
PAK2328.1620
Ball lock pin, D=14, H=58, Untreated stainless steel, Components: stainless steel A2
Material = Stainless steel
Finishing = Natural
H2 = 43,5
T = 6
H = 58
H1 = 6,5
L2 = 19,5
D = 14
D3 = 28
Força de retenção N = 90
Força de aperto N = 30
Constância térmica = ≤180 °C
D2 = 25
L1 = 5,5
D5 = 14
D4 = 21
D8 = 2,4
D7 = 4,4
D6 = 26
T2 = 2,5
T1 = 6-10
D1 = 6
M = M2x3
Material dos componentes = aço inoxidável A2
Denominação = Pino de bloqueio de esferas
Força de extração F kN = 0,5
Cisalhamento kN = 3
Superfície dos componentes = sem tratamento superficial
PAK2328.11022
Ball lock pin, D=18, H=66, Untreated stainless steel, Components: stainless steel A2
Material = Stainless steel
Finishing = Natural
H2 = 50
T = 6
H = 66
H1 = 10
L2 = 21,5
D = 18
D3 = 36
Força de retenção N = 150
Força de aperto N = 50
Constância térmica = ≤180 °C
D2 = 34
L1 = 5,5
D5 = 18
D4 = 28
D8 = 3,4
D7 = 6,5
D6 = 35
T2 = 2,5
T1 = 6-14
D1 = 10
M = M3x4
Material dos componentes = aço inoxidável A2
Denominação = Pino de bloqueio de esferas
Força de extração F kN = 1,5
Cisalhamento kN = 9
Superfície dos componentes = sem tratamento superficial