Base for articulated levelling feet stainless steel, With anti-vibration mount, D=80

Material:
Base in zinc die-cast or stainless steel 1.4305.
Insulating plate, PUR elastomer (Sylomer V12).

Version:
Base in zinc die-cast, black, powder-coated. Base in stainless steel with untreated surface. Insulating plate, grey, bonded, non-slip. Application range from -30 °C to +70 °C.
Order example:
K0419.20601
K0419.20601 and K0421.060151 assembled

Ordering note:
If the base of the articulated levelling foot and the threaded spindle or ball head are to be supplied assembled, please state the order number of the base plate and of the spindle or ball head, adding "assembled".
(e.g. K0419.20601 and K0421.060151 assembled.)

Note:
The load capacity given in the table is a recommendation of the permanent static load up to which the damping element should be used.
This load capacity corresponds to a surface pressure of 0,4 N/mm², at which the material achieves its optimum damping properties. The recommendation takes into account that, under dynamic loads, an additional stress occurs which can reach a pressure of up to 0,6 N/mm².
The insulating plate absorbs vibrations and prevents the swivel levelling foot from slipping.

Levelling feet consist of a plate and a threaded spindle or a ball head. Each base plate can be combined with a threaded spindle or a ball head.
Suitable threaded spindles, see K0421.
Suitable ball heads, see K0422.

Drawing note:
1) Insulation plate