Base with anti-vibration support disc D=50, M10 thermoplastic, Black

Articulated levelling feet consist of a disc and a hexagon screw DIN 933/ISO 4017 or a hexagon nut, low form, DIN 439/ISO 4035.
The length of the hexagon screw can be freely selected. This allows you to determine the height yourself.
The anti-slip plate absorbs vibrations, prevents the swivel levelling foot from slipping and protects the floor against abrasion.
Material:
Disc, bush and nut PA6.
Non-slip base in NBR.
Version:
black.
Order example:
K2134.204006
Note:
The load values given in the table are based on a series of tests in which a static load was applied perpendicular to the plate at the centre of the spindle. Forces acting radially, such as those caused by vibrations or other shaking effects, influence the load-bearing capacity and are not taken into account in the values specified.
Mounting:
1. Insert the hexagon screw (1) or the hexagon nut (1) into the bush (2).
2. Fit the plastic nut (3) onto the hexagon screw (1) or onto the hexagon nut (1). The result is a ball joint.
3. Simply press the ball joint into the disc (4) from above with a "click", without tools.
4. Press the non-slip base (5) against the disc (4) from below.
Scope of delivery:
Includes anti-slip base.
Does not include hexagon screw/hexagon nut.
Accessories:
Hexagon screws K0871.
Hexagon nuts K0700.
Drawing note:
1) Hexagon screw/hexagon nut
2) Bush
3) Plastic nut
4) Disc
5) Non-slip base