PAK1035.1090
Central connector set
Estimated delivery: On request
Material:
Steel.
Version:
zinc-plated part.
Order example:
K1035.1000
Note:
Connector sets are suitable for connecting two aluminium profiles at a right angle. They allow a free
positioning of the profiles. The profile slots, arranged perpendicular to one another, remain free. The surfaces can be accommodated in the profile slots without the need for additional machining.
Due to the low holding force and the absence of anti-rotation protection, these connector sets should only be used in combination with surface elements and constructions that withstand low loads.
Minimum processing time. For mounting, a hole must be drilled in one of the profiles. Thanks to the reduced diameter of the pins, the groove is not damaged during assembly. It can be completely covered by a groove cover profile.
Steel.
Version:
zinc-plated part.
Order example:
K1035.1000
Note:
Connector sets are suitable for connecting two aluminium profiles at a right angle. They allow a free
positioning of the profiles. The profile slots, arranged perpendicular to one another, remain free. The surfaces can be accommodated in the profile slots without the need for additional machining.
Due to the low holding force and the absence of anti-rotation protection, these connector sets should only be used in combination with surface elements and constructions that withstand low loads.
Minimum processing time. For mounting, a hole must be drilled in one of the profiles. Thanks to the reduced diameter of the pins, the groove is not damaged during assembly. It can be completely covered by a groove cover profile.
Without Available Technical Informance
| D2 | 9,8 |
|---|---|
| A | 22,5 |
| Largura de ranhura | 10 |
| Tipo | B |
| Versão | 90° |
| Versão 1 | central |
| Denominação | Conjunto conector |
Product Variations
| Model | D2 | A | Largura de ranhura | Tipo | Versão | Versão 1 | Denominação | Stock | Quantity | |
|---|---|---|---|---|---|---|---|---|---|---|
| PAK1035.1000 PAK1035.1000 | 9,8 | 22,5 | 10 | B | 0° | central | Conjunto conector | |||
| PAK1035.1090 PAK1035.1090 | 9,8 | 22,5 | 10 | B | 90° | central | Conjunto conector | |||
PAK1035.1000
Central connector set
D2 = 9,8
A = 22,5
Largura de ranhura = 10
Tipo = B
Versão = 0°
Versão 1 = central
Denominação = Conjunto conector
PAK1035.1090
Central connector set
D2 = 9,8
A = 22,5
Largura de ranhura = 10
Tipo = B
Versão = 90°
Versão 1 = central
Denominação = Conjunto conector