Centre jaw, B=125, H=180, L=46, 5, Case-hardened steel, Components: tool steel

Material:
Main body in case-hardened steel.
Jaws in tool steel.
Version:
Burnished main body.
Hardened jaw, untreated surface.
Order example:
K2240.0901550
Note:
Centre jaws are used to clamp 2 workpieces simultaneously.
They can be moved according to the dimensions of the workpieces and clamp 2 different workpiece sizes.
Operating mode:
Insertion of the centre jaw when clamping the blank
- The locking element on the centre jaw remains open.
- The maximum clamping stroke of 1 mm per clamping unit must not be exceeded.


Use of centre claw on the clamp with downward clamping force
- The clamping element on the centre jaw must be closed.
- The maximum clamping stroke of 1 mm per jaw side must not be exceeded on the clamp with downward clamping force.
- The support bar for clamping in K0974.0900317 / K0974.1250317 cannot be used with a clamp with downward clamping force and centre jaw.

Accessories:
Smooth jaws
for centre jaw K1002.
Jaws with pins suitable for centre jaw K1002.