Chain tensioner, F3=120, Steel hardened part, VPE=set

Material:
Tensioning hook in steel.
Retaining clip in steel.
Steel roller chains.
Version:
Hardened steel.
Order example:
K1650.15
Note:
Chain tensioners are used mainly in machine and appliance construction. With the aid of chain tensioners, round, irregularly shaped workpieces of large to very large size can be clamped securely and effectively in the simplest and quickest way.

Suitable for cylindrical workpieces, valve housings, pistons, etc.

The use of plastic elements can reduce the load on the part.
Application:
The chain length and tension force can be pre-set on the retaining clamp by means of the knurled nut. The required torque is adjusted on the tension hook.
Scope of delivery:
Chain tensioner set K1650.15:
- tensioning hook.
- retaining clamp
- 4x roller chains (2x 492 mm, 1x 238 mm, 1x 15,9 mm).
- 4x connecting links with split pins for connection.
- 6x plastic elements for push-fit.
- clamping set for tensioning chains.
- Ring spanner

Chain tensioner set K1650. 40:
- hook-type clamp.
- retaining clamp
- 4x roller chains (1x 991 mm, 1x 483 mm, 1x 229 mm, 1x 25,4 mm).
- 4x connecting links with split pins for connection.
- 6x plastic elements for push-fit.
- clamping set for tensioning chains.
- Ring spanner

Chain tensioner set K1650. 75:
- hook-type clamp.
- retaining clamp
- 2x roller chains (1x 1492 mm, 1x 984 mm).
- 2x connecting links with split pins for connection.
- 6x plastic elements for push-fit.
- clamping set for tensioning chains.
- Ring spanner

Chain tensioner set K1650. 120:
- hook-type clamp.
- retaining clamp
- 2x roller chains (1x 1485 mm, 1x 1028 mm).
- 2x connecting links with split pins for connection.
- 6x plastic elements for push-fit.
- clamping set for tensioning chains.
- ring spanner
Accessories:
Steel roller chains for chain tensioner sets K1655.
Steel clamping latches for chain tensioner sets K1656.
Steel prisms for chain tensioner sets K1662.
Extended T-slot nuts DIN 508, K0377.
Socket head cap screws DIN EN ISO 4762, K0869.
Observe:
- The opening angle of the chain must not exceed 30°.
- Maximum permissible tightening torques.