PAK1836.370
Chucks with 3 fixed jaws with jaws D=370 steel, Components: steel hardened part
Estimated delivery: On request
Plates with 3 fixed jaws are particularly suitable for central clamping
of parts on drilling and milling machines. Thanks to the arrangement of the jaws in the versions
hard and soft, parts of different sizes and shapes can be easily clamped by the
inner or outer side.
Material:
Steel.
Version:
Contact surface of the main body ground.
Hardened and ground jaws.
Order example:
K1836.270
Note:
Observe the numbering when fitting the jaws.
The jaws are precision ground. The tolerances W, X, Y, Z between each other are within the dimension of 0,05 mm.
The repeatability value for centric clamping with hard jaws is 0,02 mm.
The movable base jaws are actuated via the rotating ring located in the plate.
Thanks to the rotary movement of the threaded spindle, the large crown gear transmits the force to the base jaws, producing a synchronous movement inwards or outwards.
Lack of lubrication causes excessive wear and a reduction in clamping force. Note the regular lubrication intervals.
Advantages:
The repeatability with central clamping is 0,02 mm.
Flat design.
For drilling and milling machines.
Main body precision ground.
Excellent accessibility of the lubrication system.
Large through hole for fastening bars.
Operation with a hex key, therefore quick and simple operation.
Soft jaws can also be screwed onto the basic jaws.
Scope of delivery:
Clamping wrench.
Accessories:
K1838 Steel jaws, soft
Drawing note:
1) Reversible jaws
2) Basic jaws
3) Clamping screws
of parts on drilling and milling machines. Thanks to the arrangement of the jaws in the versions
hard and soft, parts of different sizes and shapes can be easily clamped by the
inner or outer side.
Material:
Steel.
Version:
Contact surface of the main body ground.
Hardened and ground jaws.
Order example:
K1836.270
Note:
Observe the numbering when fitting the jaws.
The jaws are precision ground. The tolerances W, X, Y, Z between each other are within the dimension of 0,05 mm.
The repeatability value for centric clamping with hard jaws is 0,02 mm.
The movable base jaws are actuated via the rotating ring located in the plate.
Thanks to the rotary movement of the threaded spindle, the large crown gear transmits the force to the base jaws, producing a synchronous movement inwards or outwards.
Lack of lubrication causes excessive wear and a reduction in clamping force. Note the regular lubrication intervals.
Advantages:
The repeatability with central clamping is 0,02 mm.
Flat design.
For drilling and milling machines.
Main body precision ground.
Excellent accessibility of the lubrication system.
Large through hole for fastening bars.
Operation with a hex key, therefore quick and simple operation.
Soft jaws can also be screwed onto the basic jaws.
Scope of delivery:
Clamping wrench.
Accessories:
K1838 Steel jaws, soft
Drawing note:
1) Reversible jaws
2) Basic jaws
3) Clamping screws
| Material | Steel |
|---|
| H2 | 59 |
|---|---|
| SW | 14 |
| B2 | 118 |
| H3 | 5 |
| H | 80 |
| H1 | 22 |
| B1 | 18 |
| D | 370 |
| H4 | 15 |
| D3 | 105 |
| Força de aperto F (kN) | 44 |
| D2 | 250 |
| H5 | 15 |
| D5 | M12 |
| D4 | 285 |
| B3 | 31,3 |
| Binário de aperto máx. Nm | 186 |
| D1 | 305 |
| B | 40 |
| B4 | 40,6 |
| Versão 1 | com mordentes |
| Material dos componentes | aço |
| Denominação | Placa com 3 mordentes fixos |
| Superfície dos componentes | endurecido |
| Área de fixação exterior | 15-300 |
| Área de fixação interior | 86-290 |
Product Variations
| Model | Material | H2 | SW | B2 | H3 | H | H1 | B1 | D | H4 | D3 | Força de aperto F (kN) | D2 | H5 | D5 | D4 | B3 | Binário de aperto máx. Nm | D1 | B | B4 | Versão 1 | Material dos componentes | Denominação | Superfície dos componentes | Área de fixação exterior | Área de fixação interior | Stock | Quantity | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PAK1836.220 PAK1836.220 | Steel | 40 | 10 | 68 | 6 | 58 | 18 | 13 | 220 | 9 | 45 | 21 | 130 | 9 | M10 | 147 | 18,5 | 78 | 170 | 26 | 24,5 | com mordentes | aço | Placa com 3 mordentes fixos | endurecido | 8-160 | 48-150 | |||
| PAK1836.270 PAK1836.270 | Steel | 43 | 11 | 82 | 6 | 65 | 20 | 13 | 270 | 10 | 60 | 25 | 155 | 10 | M10 | 172 | 22,7 | 98 | 210 | 28 | 27,9 | com mordentes | aço | Placa com 3 mordentes fixos | endurecido | 11-200 | 62-190 | |||
| PAK1836.315 PAK1836.315 | Steel | 52 | 12 | 93 | 6 | 73 | 20 | 16 | 315 | 12 | 80 | 36 | 190 | 12 | M12 | 210 | 24,9 | 156 | 255 | 32 | 32,5 | com mordentes | aço | Placa com 3 mordentes fixos | endurecido | 12-250 | 72-240 | |||
| PAK1836.370 PAK1836.370 | Steel | 59 | 14 | 118 | 5 | 80 | 22 | 18 | 370 | 15 | 105 | 44 | 250 | 15 | M12 | 285 | 31,3 | 186 | 305 | 40 | 40,6 | com mordentes | aço | Placa com 3 mordentes fixos | endurecido | 15-300 | 86-290 | |||
PAK1836.220
Chucks with 3 fixed jaws with jaws D=220 steel, Components: steel hardened part
Material = Steel
H2 = 40
SW = 10
B2 = 68
H3 = 6
H = 58
H1 = 18
B1 = 13
D = 220
H4 = 9
D3 = 45
Força de aperto F (kN) = 21
D2 = 130
H5 = 9
D5 = M10
D4 = 147
B3 = 18,5
Binário de aperto máx. Nm = 78
D1 = 170
B = 26
B4 = 24,5
Versão 1 = com mordentes
Material dos componentes = aço
Denominação = Placa com 3 mordentes fixos
Superfície dos componentes = endurecido
Área de fixação exterior = 8-160
Área de fixação interior = 48-150
PAK1836.270
Chucks with 3 fixed jaws with jaws D=270 steel, Components: steel hardened part
Material = Steel
H2 = 43
SW = 11
B2 = 82
H3 = 6
H = 65
H1 = 20
B1 = 13
D = 270
H4 = 10
D3 = 60
Força de aperto F (kN) = 25
D2 = 155
H5 = 10
D5 = M10
D4 = 172
B3 = 22,7
Binário de aperto máx. Nm = 98
D1 = 210
B = 28
B4 = 27,9
Versão 1 = com mordentes
Material dos componentes = aço
Denominação = Placa com 3 mordentes fixos
Superfície dos componentes = endurecido
Área de fixação exterior = 11-200
Área de fixação interior = 62-190
PAK1836.315
Chucks with 3 fixed jaws with jaws D=315 steel, Components: steel hardened part
Material = Steel
H2 = 52
SW = 12
B2 = 93
H3 = 6
H = 73
H1 = 20
B1 = 16
D = 315
H4 = 12
D3 = 80
Força de aperto F (kN) = 36
D2 = 190
H5 = 12
D5 = M12
D4 = 210
B3 = 24,9
Binário de aperto máx. Nm = 156
D1 = 255
B = 32
B4 = 32,5
Versão 1 = com mordentes
Material dos componentes = aço
Denominação = Placa com 3 mordentes fixos
Superfície dos componentes = endurecido
Área de fixação exterior = 12-250
Área de fixação interior = 72-240
PAK1836.370
Chucks with 3 fixed jaws with jaws D=370 steel, Components: steel hardened part
Material = Steel
H2 = 59
SW = 14
B2 = 118
H3 = 5
H = 80
H1 = 22
B1 = 18
D = 370
H4 = 15
D3 = 105
Força de aperto F (kN) = 44
D2 = 250
H5 = 15
D5 = M12
D4 = 285
B3 = 31,3
Binário de aperto máx. Nm = 186
D1 = 305
B = 40
B4 = 40,6
Versão 1 = com mordentes
Material dos componentes = aço
Denominação = Placa com 3 mordentes fixos
Superfície dos componentes = endurecido
Área de fixação exterior = 15-300
Área de fixação interior = 86-290