Clamp with force sensor M16/M18, L=125, B=40, H=25, Hardened steel part hardened and burnished

Smart Products offer the added value of being able to detect electronically the actuation status of various clamping and support elements.

The clamp with force sensor allows the force with which a workpiece is clamped to be compared with a previously defined nominal value.
The setting of the nominal value is described in the operating instructions.

If the clamp is connected to the Bluetooth module K1831 via the integrated USB type C port, it transmits the sensor status wirelessly. The signal can then be received and processed, for example, by the gateway K1494.
In addition, the integrated LED display of the Bluetooth module indicates the status of the clamping element.

The clamp is supplied with power via the Bluetooth module, which can be replaced if necessary without reconfiguration.
Material:
Hardened steel.
Connector housing in steel.
Version:
Hardened and burnished. Hardness 36-40 HRC.
Order example:
K1824.12
Note:
The clamp with force sensor allows the force with which a workpiece is clamped to be compared with a previously defined nominal value. The adjustment of the nominal value is described in the operating instructions.
If the clamp is equipped with a Bluetooth module, the force can be recorded and processed.
The clamp is supplied with power via the Bluetooth module, which can be replaced if necessary without reconfiguration.
The Bluetooth module K1831 can be connected to the clamp via USB Type C.
A reliable force indication can only be guaranteed if clamping is carried out in the designated area.
Application:
With the clamp, the clamping process can be monitored.
Tolerance: ±10% relative to the nominal value.
Temperature range:
0 °C to +65 °C.
Accessories:
Bluetooth module K1831.
Gateway K1494.
Technical data:
See Downloads, Technical note.
Safety:
Clamps with force sensor are not suitable for protecting persons.
Drawing note:
1) Force sensor
2) USB Type-C
3) Preferred clamping area