PAK1957.0919
Clamping claw round steel
Estimated delivery: On request
Material:
Steel.
Version:
hardened (52 +2 HRC) and burnished.
Order example:
K1957.0919
Note:
The clamping jaws are designed for mounting on the jaws of vices. For mounting, only a slot with threaded holes is required. The sharp edges of the clamping jaws grip the workpiece and prevent lateral and horizontal movement.
– Form-fit clamping enables high cutting values.
- Low clamping heights of 1,5 mm (material cost savings).
– The contour of the jaws generates a slight downward pressure.
The clamping jaws extend the application possibilities of your vice. With its use, round machined parts with oversized contours and dimensions can be clamped quickly and securely.
Drawing note:
1) Workpiece
2) Jaw
Steel.
Version:
hardened (52 +2 HRC) and burnished.
Order example:
K1957.0919
Note:
The clamping jaws are designed for mounting on the jaws of vices. For mounting, only a slot with threaded holes is required. The sharp edges of the clamping jaws grip the workpiece and prevent lateral and horizontal movement.
– Form-fit clamping enables high cutting values.
- Low clamping heights of 1,5 mm (material cost savings).
– The contour of the jaws generates a slight downward pressure.
The clamping jaws extend the application possibilities of your vice. With its use, round machined parts with oversized contours and dimensions can be clamped quickly and securely.
Drawing note:
1) Workpiece
2) Jaw
| Material | Steel |
|---|
| Versão | Garra de fixação |
|---|---|
| Versão 1 | redondo |
| Denominação | Garra de fixação |
Product Variations
| Model | Material | Versão | Versão 1 | Denominação | Stock | Quantity | |
|---|---|---|---|---|---|---|---|
| PAK1957.0919 PAK1957.0919 | Steel | Garra de fixação | redondo | Garra de fixação | |||
PAK1957.0919
Clamping claw round steel
Material = Steel
Versão = Garra de fixação
Versão 1 = redondo
Denominação = Garra de fixação