Clamping lever with reinforcing elements TA.4 M10, Red zinc die-cast RAL3003 plastic-coated, Components: steel

With clamping levers with integrated booster elements for increasing the clamping force, the clamping force can be increased by up to 75% compared with standard clamping levers.

In addition, this product can also be used by people with limited manual strength (for example, in the rehabilitation sector), so that they can achieve comparable clamping forces with minimal effort. Less manual force is also required to loosen the clamped clamping lever.

The increase in tensioning force is achieved by means of the fitted axial needle bearing, which generates very low surface friction on the fixed contact surface during clamping. The hardened contact washers are designed for high tensile forces, and the bearing ensures a long service life with its high load capacity.

Due to the large fixed support surface, the clamped component is permanently protected. In this way, the use of a washer is no longer necessary.
Material:
Zinc die-cast lever handle according to DIN EN 12844.
Steel parts with strength class 5.8.
Version:
Lever handle with plastic coating.
Burnished steel parts.
Axial needle roller bearing with hardened and ground contact washers.
Order example:
K1599.5121 (clamping lever in satin black)
Operating mode:
The lever handle engages in the threaded insert via the toothed ring
in the non-actuated state. By lifting the lever handle, it can be
repositioned and re-engaged in the toothed ring by the spring force.
Application:
Machine, apparatus and equipment construction, rehabilitation sector.
Mounting:
The screw-in depth must be at least 2 x the thread diameter. In addition, the thread must be lightly lubricated during installation.
Advantages:
Significant increase in clamping forces with the same tightening torque.
High-quality axial needle roller bearing with high load capacity and long service life.
The fixed support surface preserves the component.
On request:
Additional colours.