PAK0643.218053
Clamping mandrel for lateral clamping, Style B, Structural steel burnished, Components: hardened steel hardened
Estimated delivery: On request
Material:
Structural steel housing.
Hardened steel clamping screw.
Version:
Burnished housing.
Clamping screw, hardened in 10.9, hardened and PTFE-coated.
Note:
Due to its lateral clamping, this mandrel is mainly suitable for finish machining of turned and milled parts with blind holes. By means of turning and milling processes, the diameter D can be adapted to the diameter of the workpiece to be clamped.
Clamping is done manually with an Allen key.
* D min. = the smallest permissible diameter to which “D” can be turned or milled.
Mounting:
Open the mandrel approx. 0,1 mm (clamping stroke) above the diameter in the rest state. The mandrel can then be machined or milled to the inside diameter of the workpiece.
A locking ring for machining is included in the scope of delivery.
If necessary, the flange can be centred in a plain bore or with fitting pins.
Form A is supplied with 6 fixing screws.
Structural steel housing.
Hardened steel clamping screw.
Version:
Burnished housing.
Clamping screw, hardened in 10.9, hardened and PTFE-coated.
Note:
Due to its lateral clamping, this mandrel is mainly suitable for finish machining of turned and milled parts with blind holes. By means of turning and milling processes, the diameter D can be adapted to the diameter of the workpiece to be clamped.
Clamping is done manually with an Allen key.
* D min. = the smallest permissible diameter to which “D” can be turned or milled.
Mounting:
Open the mandrel approx. 0,1 mm (clamping stroke) above the diameter in the rest state. The mandrel can then be machined or milled to the inside diameter of the workpiece.
A locking ring for machining is included in the scope of delivery.
If necessary, the flange can be centred in a plain bore or with fitting pins.
Form A is supplied with 6 fixing screws.
| Material | Structural steel |
|---|---|
| Finishing | Burnished |
| H2 | 21 |
|---|---|
| H1 | 25,4 |
| H3 | 45 |
| SW | 6 |
| H | 44,4 |
| D1 | 53,3 |
| D2 | 25 |
| D | 53,3 |
| Força de aperto máx. kN | 20 |
| Binário de aperto máx. Nm | 66 |
| Versão 1 | de fixação lateral, de aperto lateral |
| Denominação | Mandril de fixação |
| Forma | B |
| Aplicação | peças maquinadas |
| Material dos componentes | aço temperado |
| Superfície dos componentes | temperado, endurecido e revestido com PTFE |
| Tipo de fixação | fixação interna |
Product Variations
| Model | Material | Finishing | H2 | H1 | H3 | SW | H | D1 | D2 | D | Força de aperto máx. kN | Binário de aperto máx. Nm | Versão 1 | Denominação | Forma | Aplicação | Material dos componentes | Superfície dos componentes | Tipo de fixação | Stock | Quantity | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PAK0643.218053 PAK0643.218053 | Structural steel | Burnished | 21 | 25,4 | 45 | 6 | 44,4 | 53,3 | 25 | 53,3 | 20 | 66 | de fixação lateral, de aperto lateral | Mandril de fixação | B | peças maquinadas | aço temperado | temperado, endurecido e revestido com PTFE | fixação interna | |||
PAK0643.218053
Clamping mandrel for lateral clamping, Style B, Structural steel burnished, Components: hardened steel hardened
Material = Structural steel
Finishing = Burnished
H2 = 21
H1 = 25,4
H3 = 45
SW = 6
H = 44,4
D1 = 53,3
D2 = 25
D = 53,3
Força de aperto máx. kN = 20
Binário de aperto máx. Nm = 66
Versão 1 = de fixação lateral, de aperto lateral
Denominação = Mandril de fixação
Forma = B
Aplicação = peças maquinadas
Material dos componentes = aço temperado
Superfície dos componentes = temperado, endurecido e revestido com PTFE
Tipo de fixação = fixação interna