PAK2098.08100
Clamping mandrel, Style A, Untreated stainless steel, D=10, D=8
Estimated delivery: On request
Material:
Stainless steel 1.4305.
Version:
Untreated surface.
Order example:
K2098.08100
Note:
The clamping mandrel is used in small bores (blind holes or through holes) to position and clamp workpieces. The clamping movement is carried out manually from below or automatically via the pneumatic or hydraulic system.
They can be ground to the desired diameter. The workpiece locating bore has the tolerance H7.
D min. = the smallest permissible diameter to which "D" can be ground.
- usable in bores from Ø5 to Ø12,5 mm
- compact design, little mounting space
- simple handling
- any mounting position
- different installation variants possible
- protection of the workpiece surface through surface pressure
- individual adjustment adaptable to the diameter
Mounting:
If required, diameter D can be adapted to the diameter to be clamped. In this case, open the clamping mandrel approx. 0,2 mm (clamping stroke) relative to the diameter in the rest state, by fastening the tie rod (raised countersunk head screw with cross recess) with the supplied hexagon nut. The clamping mandrel will be ground to the inside diameter of the workpiece.
Technical data:
The max. tensile force kN stated in the table refers to the pull pin D4.
Stainless steel 1.4305.
Version:
Untreated surface.
Order example:
K2098.08100
Note:
The clamping mandrel is used in small bores (blind holes or through holes) to position and clamp workpieces. The clamping movement is carried out manually from below or automatically via the pneumatic or hydraulic system.
They can be ground to the desired diameter. The workpiece locating bore has the tolerance H7.
D min. = the smallest permissible diameter to which "D" can be ground.
- usable in bores from Ø5 to Ø12,5 mm
- compact design, little mounting space
- simple handling
- any mounting position
- different installation variants possible
- protection of the workpiece surface through surface pressure
- individual adjustment adaptable to the diameter
Mounting:
If required, diameter D can be adapted to the diameter to be clamped. In this case, open the clamping mandrel approx. 0,2 mm (clamping stroke) relative to the diameter in the rest state, by fastening the tie rod (raised countersunk head screw with cross recess) with the supplied hexagon nut. The clamping mandrel will be ground to the inside diameter of the workpiece.
Technical data:
The max. tensile force kN stated in the table refers to the pull pin D4.
| Material | Stainless steel |
|---|---|
| Finishing | Natural |
| Força de aperto máx. kN | 3,9 |
|---|---|
| D | 10 |
| L | 12 |
| H | 15 |
| H1 | 3 |
| SW1 | 8 |
| D3 | M8 |
| D2 | 8 |
| L1 | 8 |
| D4 | M4 |
| D1 | 12 |
| Forma | A |
| Denominação | Mandril de fixação |
| Chave de aço | 1.4305 |
| L2 | 13 |
| Força de tração máx. kN | 6 |
Product Variations
| Model | Material | Finishing | Força de aperto máx. kN | D | L | H | H1 | SW1 | D3 | D2 | L1 | D4 | D1 | Forma | Denominação | Chave de aço | L2 | Força de tração máx. kN | Stock | Quantity | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PAK2098.06080 PAK2098.06080 | Stainless steel | Natural | 2,6 | 8 | 10 | 12,5 | 2,5 | 6 | M6 | 6 | 6 | M3 | 10 | A | Mandril de fixação | 1.4305 | 8 | 3,5 | |||
| PAK2098.08100 PAK2098.08100 | Stainless steel | Natural | 3,9 | 10 | 12 | 15 | 3 | 8 | M8 | 8 | 8 | M4 | 12 | A | Mandril de fixação | 1.4305 | 13 | 6 | |||
| PAK2098.10125 PAK2098.10125 | Stainless steel | Natural | 8,5 | 12,5 | 12 | 19 | 3 | 10 | M10 | 10 | 8 | M5 | 12,5 | A | Mandril de fixação | 1.4305 | 15 | 9,5 | |||
PAK2098.06080
Clamping mandrel, Style A, Untreated stainless steel, D=8, D=6
Material = Stainless steel
Finishing = Natural
Força de aperto máx. kN = 2,6
D = 8
L = 10
H = 12,5
H1 = 2,5
SW1 = 6
D3 = M6
D2 = 6
L1 = 6
D4 = M3
D1 = 10
Forma = A
Denominação = Mandril de fixação
Chave de aço = 1.4305
L2 = 8
Força de tração máx. kN = 3,5
PAK2098.08100
Clamping mandrel, Style A, Untreated stainless steel, D=10, D=8
Material = Stainless steel
Finishing = Natural
Força de aperto máx. kN = 3,9
D = 10
L = 12
H = 15
H1 = 3
SW1 = 8
D3 = M8
D2 = 8
L1 = 8
D4 = M4
D1 = 12
Forma = A
Denominação = Mandril de fixação
Chave de aço = 1.4305
L2 = 13
Força de tração máx. kN = 6
PAK2098.10125
Clamping mandrel, Style A, Untreated stainless steel, D=12, 5, D=10
Material = Stainless steel
Finishing = Natural
Força de aperto máx. kN = 8,5
D = 12,5
L = 12
H = 19
H1 = 3
SW1 = 10
D3 = M10
D2 = 10
L1 = 8
D4 = M5
D1 = 12,5
Forma = A
Denominação = Mandril de fixação
Chave de aço = 1.4305
L2 = 15
Força de tração máx. kN = 9,5