PAK1293.210120
Clamping mandrel, Style B, Untreated stainless steel, D=12, F3=0, 8
Estimated delivery: On request
Material:
Stainless steel 1.4305.
Version:
Untreated surface.
Note:
The clamping mandrel is used in small bores (form A for through holes, form B for through holes and blind holes) to position and clamp workpieces. The clamping movement is carried out manually from above with a hexagon key. They can be ground to the desired diameter. The workpiece locating bore has the tolerance H7.
D min. = the smallest permissible diameter to which "D" can be ground.
- usable in bores from Ø5 to Ø12,5 mm
- compact design, little mounting space
- simple handling
- any mounting position
- different installation variants possible
- protection of the workpiece surface through surface pressure
- individual adjustment adaptable to the diameter
Form A: for through holes.
Form B: for through holes or blind holes.
Mounting:
If required, diameter D can be adapted to the diameter to be clamped. In this case, open the mandrel approx. 0,2 mm (clamping stroke) above the diameter in the rest state. The clamping mandrel will be ground to the inside diameter of the workpiece.
Stainless steel 1.4305.
Version:
Untreated surface.
Note:
The clamping mandrel is used in small bores (form A for through holes, form B for through holes and blind holes) to position and clamp workpieces. The clamping movement is carried out manually from above with a hexagon key. They can be ground to the desired diameter. The workpiece locating bore has the tolerance H7.
D min. = the smallest permissible diameter to which "D" can be ground.
- usable in bores from Ø5 to Ø12,5 mm
- compact design, little mounting space
- simple handling
- any mounting position
- different installation variants possible
- protection of the workpiece surface through surface pressure
- individual adjustment adaptable to the diameter
Form A: for through holes.
Form B: for through holes or blind holes.
Mounting:
If required, diameter D can be adapted to the diameter to be clamped. In this case, open the mandrel approx. 0,2 mm (clamping stroke) above the diameter in the rest state. The clamping mandrel will be ground to the inside diameter of the workpiece.
| Material | Stainless steel |
|---|---|
| Finishing | Natural |
| Força de aperto máx. kN | 0,8 |
|---|---|
| D | 12 |
| SW2 | 4 |
| L | 11,8 |
| T | 4 |
| H | 15 |
| H1 | 3 |
| SW1 | 10 |
| D3 | M10 |
| D2 | 10 |
| L1 | 8 |
| Binário de aperto máx. Nm | 8,1 |
| D1 | 14 |
| Forma | B |
| Denominação | Mandril de fixação |
| Chave de aço | 1.4305 |
Product Variations
| Model | Material | Finishing | Força de aperto máx. kN | D | SW2 | L | T | H | H1 | SW1 | D3 | D2 | L1 | Binário de aperto máx. Nm | D1 | Forma | Denominação | Chave de aço | Stock | Quantity | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PAK1293.204050 PAK1293.204050 | Stainless steel | Natural | 0,15 | 5 | 2 | 9,8 | 2 | 6,5 | 2,5 | 8 | M8 | 8 | 6 | 0,9 | 10 | B | Mandril de fixação | 1.4305 | |||
| PAK1293.205060 PAK1293.205060 | Stainless steel | Natural | 0,19 | 6 | 2 | 9,8 | 2 | 8 | 2,5 | 10 | M8 | 8 | 6 | 0,9 | 12 | B | Mandril de fixação | 1.4305 | |||
| PAK1293.206080 PAK1293.206080 | Stainless steel | Natural | 0,34 | 8 | 2,5 | 9,8 | 2,5 | 10 | 2,5 | 10 | M8 | 8 | 6 | 2,4 | 12 | B | Mandril de fixação | 1.4305 | |||
| PAK1293.208100 PAK1293.208100 | Stainless steel | Natural | 0,62 | 10 | 3 | 11,8 | 3 | 12 | 3 | 10 | M8 | 8 | 8 | 4,4 | 12 | B | Mandril de fixação | 1.4305 | |||
| PAK1293.210120 PAK1293.210120 | Stainless steel | Natural | 0,8 | 12 | 4 | 11,8 | 4 | 15 | 3 | 10 | M10 | 10 | 8 | 8,1 | 14 | B | Mandril de fixação | 1.4305 | |||
PAK1293.204050
Clamping mandrel, Style B, Untreated stainless steel, D=5, F3=0, 15
Material = Stainless steel
Finishing = Natural
Força de aperto máx. kN = 0,15
D = 5
SW2 = 2
L = 9,8
T = 2
H = 6,5
H1 = 2,5
SW1 = 8
D3 = M8
D2 = 8
L1 = 6
Binário de aperto máx. Nm = 0,9
D1 = 10
Forma = B
Denominação = Mandril de fixação
Chave de aço = 1.4305
PAK1293.205060
Clamping mandrel, Style B, Untreated stainless steel, D=6, F3=0, 19
Material = Stainless steel
Finishing = Natural
Força de aperto máx. kN = 0,19
D = 6
SW2 = 2
L = 9,8
T = 2
H = 8
H1 = 2,5
SW1 = 10
D3 = M8
D2 = 8
L1 = 6
Binário de aperto máx. Nm = 0,9
D1 = 12
Forma = B
Denominação = Mandril de fixação
Chave de aço = 1.4305
PAK1293.206080
Clamping mandrel, Style B, Untreated stainless steel, D=8, F3=0, 34
Material = Stainless steel
Finishing = Natural
Força de aperto máx. kN = 0,34
D = 8
SW2 = 2,5
L = 9,8
T = 2,5
H = 10
H1 = 2,5
SW1 = 10
D3 = M8
D2 = 8
L1 = 6
Binário de aperto máx. Nm = 2,4
D1 = 12
Forma = B
Denominação = Mandril de fixação
Chave de aço = 1.4305
PAK1293.208100
Clamping mandrel, Style B, Untreated stainless steel, D=10, F3=0, 62
Material = Stainless steel
Finishing = Natural
Força de aperto máx. kN = 0,62
D = 10
SW2 = 3
L = 11,8
T = 3
H = 12
H1 = 3
SW1 = 10
D3 = M8
D2 = 8
L1 = 8
Binário de aperto máx. Nm = 4,4
D1 = 12
Forma = B
Denominação = Mandril de fixação
Chave de aço = 1.4305
PAK1293.210120
Clamping mandrel, Style B, Untreated stainless steel, D=12, F3=0, 8
Material = Stainless steel
Finishing = Natural
Força de aperto máx. kN = 0,8
D = 12
SW2 = 4
L = 11,8
T = 4
H = 15
H1 = 3
SW1 = 10
D3 = M10
D2 = 10
L1 = 8
Binário de aperto máx. Nm = 8,1
D1 = 14
Forma = B
Denominação = Mandril de fixação
Chave de aço = 1.4305