PAK1749.0500512
Clamping wedge with fixed jaw, Single-sided form E with pins, B=50, M12, Case-hardened steel, hardened and phosphated
Estimated delivery: On request
The clamping wedges are suitable for multiple clamping due to their operating principle.
Thanks to the locking surfaces, high clamping forces are achieved.
When the clamping screw is turned, the clamping segment moves outwards, pressing the workpiece against the fixed stop jaws.
Through the slotted hole in the double wedge, the clamping wedges can be displaced and compensate for tolerances.
Displacement stroke: M12 = ±1,0 mm, M16 = ±1,5 mm.
Material:
Double wedge and clamping segments in case-hardened steel.
Version:
Double wedge and clamping segments hardened, phosphated.
Note:
The clamping wedges can only be used together with the clamping rail K1746, to cater for multiple clamping.
The lateral mounting holes serve to attach stops for workpieces to be machined.
With the two fixing holes positioned on the clamping surfaces, additional support bars/rails can be mounted to obtain a clamping depth
ideal of the workpiece.
Advantages:
The lateral scale of the clamping rail and the fixed jaw ensure a high degree of clamping repeatability.
Scope of delivery:
Clamping wedge.
Clamping screws.
T-nuts.
Thanks to the locking surfaces, high clamping forces are achieved.
When the clamping screw is turned, the clamping segment moves outwards, pressing the workpiece against the fixed stop jaws.
Through the slotted hole in the double wedge, the clamping wedges can be displaced and compensate for tolerances.
Displacement stroke: M12 = ±1,0 mm, M16 = ±1,5 mm.
Material:
Double wedge and clamping segments in case-hardened steel.
Version:
Double wedge and clamping segments hardened, phosphated.
Note:
The clamping wedges can only be used together with the clamping rail K1746, to cater for multiple clamping.
The lateral mounting holes serve to attach stops for workpieces to be machined.
With the two fixing holes positioned on the clamping surfaces, additional support bars/rails can be mounted to obtain a clamping depth
ideal of the workpiece.
Advantages:
The lateral scale of the clamping rail and the fixed jaw ensure a high degree of clamping repeatability.
Scope of delivery:
Clamping wedge.
Clamping screws.
T-nuts.
| Material | Case-hardened steel |
|---|---|
| Finishing | Hardened and phosphated |
| B2 | 18 |
|---|---|
| Força de aperto máx. kN | 30 |
| H3 | 3,5 |
| H | 25 |
| H1 | 12,5 |
| B1 | 30 |
| H4 | 5 |
| L máx. | 80,5 |
| L mín. | 74,5 |
| G Parafuso de cabeça cilíndrica DIN 912 | M12x30 |
| D Rosca fêmea | M5 |
| H5 | 9 |
| H6 | 4,75 |
| Binário de aperto máx. Nm | 85 |
| B | 50 |
| Denominação | Cunha de fixação |
| Forma | E |
| Tipo de forma | com pinos |
| Versão 1 | com mordente fixo |
| Z Parafuso de cabeça cilíndrica DIN 912 | M12x25 |
| C Furo passante para parafuso de cabeça cilíndrica DIN 912 | M12 |
| D1 | M6 |
| Versão 2 | unilateral |
| L1 | 2,5 |
| B3 | 5H7 |
Product Variations
| Model | Material | Finishing | Forma | Versão 1 | Denominação | L mín. | L máx. | H | H1 | Z Parafuso de cabeça cilíndrica DIN 912 | B1 | H6 | D1 | Força de aperto máx. kN | D Rosca fêmea | Tipo de forma | C Furo passante para parafuso de cabeça cilíndrica DIN 912 | B | B2 | H3 | Binário de aperto máx. Nm | H5 | Versão 2 | F Parafuso de cabeça cilíndrica DIN 912 | L1 | B3 | H4 | G Parafuso de cabeça cilíndrica DIN 912 | Stock | Quantity | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PAK1749.0500512 PAK1749.0500512 | Case-hardened steel | Hardened and phosphated | E | com mordente fixo | Cunha de fixação | 74,5 | 80,5 | 25 | 12,5 | M12x25 | 30 | 4,75 | M6 | 30 | M5 | com pinos | M12 | 50 | 18 | 3,5 | 85 | 9 | unilateral | - | 2,5 | 5H7 | 5 | M12x30 | |||
| PAK1749.0720516 PAK1749.0720516 | Case-hardened steel | Hardened and phosphated | E | com mordente fixo | Cunha de fixação | 94,6 | 102 | 39,7 | 21,3 | M16X40 | 44 | 4,75 | M6 | 50 | M6 | com pinos | M16 | 72 | 27 | 3,5 | 150 | 9 | unilateral | - | 4 | 8H7 | - | M16x50 | |||
| PAK1749.1000516 PAK1749.1000516 | Case-hardened steel | Hardened and phosphated | E | com mordente fixo | Cunha de fixação | 111 | 121 | 42,6 | 21,6 | M16X40 | 64 | 4,75 | M8 | 50 | M8 | com pinos | M16 | 100 | 40 | 5 | 150 | 9 | unilateral | M14X1,5X50 | 4,5 | 10H7 | - | - | |||
PAK1749.0500512
Clamping wedge with fixed jaw, Single-sided form E with pins, B=50, M12, Case-hardened steel, hardened and phosphated
Material = Case-hardened steel
Finishing = Hardened and phosphated
Forma = E
Versão 1 = com mordente fixo
Denominação = Cunha de fixação
L mín. = 74,5
L máx. = 80,5
H = 25
H1 = 12,5
Z Parafuso de cabeça cilíndrica DIN 912 = M12x25
B1 = 30
H6 = 4,75
D1 = M6
Força de aperto máx. kN = 30
D Rosca fêmea = M5
Tipo de forma = com pinos
C Furo passante para parafuso de cabeça cilíndrica DIN 912 = M12
B = 50
B2 = 18
H3 = 3,5
Binário de aperto máx. Nm = 85
H5 = 9
Versão 2 = unilateral
L1 = 2,5
B3 = 5H7
H4 = 5
G Parafuso de cabeça cilíndrica DIN 912 = M12x30
PAK1749.0720516
Clamping wedge with fixed jaw, Single-sided form E with pins, B=72, M16, Case-hardened steel, hardened and phosphated
Material = Case-hardened steel
Finishing = Hardened and phosphated
Forma = E
Versão 1 = com mordente fixo
Denominação = Cunha de fixação
L mín. = 94,6
L máx. = 102
H = 39,7
H1 = 21,3
Z Parafuso de cabeça cilíndrica DIN 912 = M16X40
B1 = 44
H6 = 4,75
D1 = M6
Força de aperto máx. kN = 50
D Rosca fêmea = M6
Tipo de forma = com pinos
C Furo passante para parafuso de cabeça cilíndrica DIN 912 = M16
B = 72
B2 = 27
H3 = 3,5
Binário de aperto máx. Nm = 150
H5 = 9
Versão 2 = unilateral
L1 = 4
B3 = 8H7
G Parafuso de cabeça cilíndrica DIN 912 = M16x50
PAK1749.1000516
Clamping wedge with fixed jaw, Single-sided form E with pins, B=100, M16, Case-hardened steel, hardened and phosphated
Material = Case-hardened steel
Finishing = Hardened and phosphated
Forma = E
Versão 1 = com mordente fixo
Denominação = Cunha de fixação
L mín. = 111
L máx. = 121
H = 42,6
H1 = 21,6
Z Parafuso de cabeça cilíndrica DIN 912 = M16X40
B1 = 64
H6 = 4,75
D1 = M8
Força de aperto máx. kN = 50
D Rosca fêmea = M8
Tipo de forma = com pinos
C Furo passante para parafuso de cabeça cilíndrica DIN 912 = M16
B = 100
B2 = 40
H3 = 5
Binário de aperto máx. Nm = 150
H5 = 9
Versão 2 = unilateral
F Parafuso de cabeça cilíndrica DIN 912 = M14X1,5X50
L1 = 4,5
B3 = 10H7