Compression latch key, adjustable tongue, Double blade 5 mm, H=32, Zinc die-cast

Material:
Housing and actuator in zinc die-cast.
Flat sealing ring made of rubber.
Version:
Chrome-plated housing and actuator,
in the version with black powder-coated knob.
Order example:
Compression cam latch K0531.18321
Latch tongue K0532.1000X590
Note:
Compression cam latches are used predominantly on doors and housings that require a high sealing pressure. Can be used on the right or left. The closing stroke is always performed clockwise.

Vibration-proof, protection against water and dust according to IP65.

Order the tongue separately in the desired version. Each tongue can be combined with all housings.

*Dimension A results from the combination of tongue latch and tongue and is shown on the corresponding tongues.
Functions:
When the drive is turned clockwise, the tongue is rotated by 90° and brought into the closing position. When turned a further 90°, the tongue is tightened via the thread in the axial position, thereby increasing the pressure. The clamping stroke is 6 mm. The fixing nut is applied on one side as an earthing nut with claws. The bent tongue can be used positively and negatively.
Accessories:
Special wrench K0535.
Latch tongues for compression tongue latch with adjustable tongue height, steel K0532.
Drawing note:
Drive:
a) Square profile 8 mm
b) Double bit 3 mm
c) Double bit 5 mm
d) Grip
e) Triangular 7 mm