Condition monitoring sensor, horizontal base, Normally open TA.3 M06X35, Form V for vertical quick clamps, Steel

Status monitoring sensors with bracket are used to detect the actuation status of quick-action clamps.
The sensor detects whether the clamp is open or closed, enabling this information to be processed electronically.
The sensor is fixed to the clamp by means of a bracket.
Material:
Stainless steel.
Version:
Untreated surface.
Note:
The condition sensor and bracket are supplied disassembled.
Mounting:
The condition monitoring sensor is fixed on the nuts on the bracket and adjusted to the dimension L1.
The bracket is fixed with the screws of the quick-action clamp through the through holes between the pedestal and the mounting surface.
Fine adjustment of the switching point is carried out during assembly of the clamp.
The detailed procedure can be found in the assembly instructions.
Accessories:
K0662
K1276
K1737
Technical data:
Inductive sensor:
Output circuit: PNP normally open contact (NO)
Operating voltage: 10 - 30 V DC
Operating current: 100 mA
Operating distance: 0,8 mm
Switching frequency: 5000 Hz
Short-circuit protection: yes
Reverse polarity protection: yes
Protection class: IP 67
Connection type: cable, 0,3 m, PUR, with plug connector
Temperature range: -25° C - +70°C
Approval: CE, c-UL-us, UKCA, WEEE
Safety:
Status monitoring sensors are not suitable for use as safety devices for the protection of persons.
Drawing note:
1) LED display

BN = brown
BK = black
BU = blue