Connecting friction joint GR.40/40, I, NB=8, Nm=3 aluminium

Material:
Housing: die-cast aluminium.
Inserts and friction shaft: steel.
Ring and cover caps: plastic.
Plates for clamping in slots: cast aluminium.
Screws, washers and T-nuts: steel.
Version:
Housing: painted in aluminium colour.
Inserts and friction shaft: untreated surface.
Ring and cover caps: similar to RAL 7042.
Plates for clamping in slots: painted in aluminium colour.
Screws, washers, T-nuts: zinc-plated.
Order example:
K2175.030
Note:
Connecting piece for friction joints for the individual construction of swivel arms using aluminium profiles. The connecting parts for friction hinge joints are characterised by a fixed friction torque, available in 6 steps from 0,5 to 15 Nm. Rotation of 360°. Profile size 40 mm.

The connection side can be screwed into the profile slot lengthwise or crosswise, so that the friction shaft is positioned perpendicular to the profile.
The articulation side can be fixed to the profile lengthwise, crosswise or frontally. For top mounting, a thread M8 must be provided (min. 15 mm deep) in the central bore. When mounting on flat surfaces, the supplied plates for clamping in slots can be omitted.

The maximum torque load M is 45 Nm.
Scope of delivery:
1 Connecting piece for friction joints
1 Finishing cap
1 Screw DIN EN ISO 4762 (DIN 912) - M8x45 (for T-nut, joint side)
1 Screw DIN EN ISO 4762 (DIN 912) - M8x25 (for T-nut, connection side)
1 Screw DIN EN ISO 4762 (DIN 912) - M8x50 (for central bore, joint side)
1 Screw DIN EN ISO 4762 (DIN 912) - M8x30 (for central bore, connection side)
2 Washers 8-FSt
2 Plates for slot fastening
2 T-nuts - Slot 8 - M8