PAK2370.003509
Cylindrical wheel, With ball bearing, Form A without pin, D=35, B=9, White polyacetal, Components: stainless steel
Estimated delivery: On request
Material:
Polyacetal (POM) coating.
Bearings and pins in stainless steel.
Version:
White coating.
Note:
The coating is firmly moulded onto a ball bearing.
The advantage of the POM coating is its quiet operation.
The guide wheels are not suitable for axial or impact loads.
The radial load was tested at one million revolutions at 300 min-1. The load may vary depending on the operating conditions and the environment.
Technical data:
Operating temperatures of up to 105 °C possible.
Polyacetal (POM) coating.
Bearings and pins in stainless steel.
Version:
White coating.
Note:
The coating is firmly moulded onto a ball bearing.
The advantage of the POM coating is its quiet operation.
The guide wheels are not suitable for axial or impact loads.
The radial load was tested at one million revolutions at 300 min-1. The load may vary depending on the operating conditions and the environment.
Technical data:
Operating temperatures of up to 105 °C possible.
| Material | POM (Polyacetal) or Acetal |
|---|---|
| Color | White |
| D | 35 |
|---|---|
| D1 | 8 |
| Rolamento de esferas | 608-HZZ |
| Carga radial N | 196 |
| Chumaceira da roda | Rolamento de esferas |
| Forma | A |
| Versão 2 | com rolamento de esferas |
| Versão 1 | cilíndrico |
| Material dos componentes | aço inoxidável |
| Denominação | Roda |
| B | 9 |
| Tipo de forma | sem pino |
