PAK2430.2460
Double-sided clamp, Rotating, D=M24X2, L=60, Hardened steel
Estimated delivery: On request
Material:
Hardened steel.
Version:
hardened and burnished part.
Note:
These double-sided clamps are particularly suitable for multiple clamping. In applications with special requirements, the mounting flange can be replaced by a custom-made special flange. To replace, simply loosen the clamping screw. Always provide a support point on both sides of the clamping flange.
Operating principle:
1. Tighten the hexagon screw with a hand tool or power tool (make sure that the maximum tightening torque is observed). During the clamping process, the flange automatically performs a quarter turn, thus starting the clamping stroke for correct clamping.
2. To release, proceed in reverse order. The clamping flange automatically returns to its initial position (the position of the flange can be changed by means of the clamping screw).
Drawing note:
1) Hexagon screw
2) Slotted nut
3) Locking screw
Hardened steel.
Version:
hardened and burnished part.
Note:
These double-sided clamps are particularly suitable for multiple clamping. In applications with special requirements, the mounting flange can be replaced by a custom-made special flange. To replace, simply loosen the clamping screw. Always provide a support point on both sides of the clamping flange.
Operating principle:
1. Tighten the hexagon screw with a hand tool or power tool (make sure that the maximum tightening torque is observed). During the clamping process, the flange automatically performs a quarter turn, thus starting the clamping stroke for correct clamping.
2. To release, proceed in reverse order. The clamping flange automatically returns to its initial position (the position of the flange can be changed by means of the clamping screw).
Drawing note:
1) Hexagon screw
2) Slotted nut
3) Locking screw
| Material | Hardened steel |
|---|---|
| Thread | M24 x 2 |
| L1 | 28 |
|---|---|
| S | 9 |
| F máx. kN | 16,5 |
| H1 | 7 |
| L | 60 |
| H | 87 |
| SW1 | 13 |
| B | 35 |
| D1 | M8 |
| D3 | 14 |
| D | M24x2 |
| A | 22 |
| D2 | 36 |
| Binário de aperto máx. Nm | 25,3 |
| SW2 | 3 |
| Versão 2 | giratório |
| Versão 1 | bilateral |
| Denominação | Grampo |
| S1 | 6 |
| S2 | 4 |
Product Variations
| Model | Material | Thread | D2 | SW1 | L1 | H1 | SW2 | D3 | Binário de aperto máx. Nm | H | D1 | B | F máx. kN | S | A | L | D | Versão 2 | Versão 1 | Denominação | S1 | S2 | Stock | Quantity | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PAK2430.1640 PAK2430.1640 | Hardened steel | M16 x 1 | 25 | 10 | 18 | 5 | 2,5 | 10 | 10,4 | 61 | M6 | 25 | 8,97 | 7 | 15 | 40 | M16x1 | giratório | bilateral | Grampo | 4,5 | 2,5 | |||
| PAK2430.2460 PAK2430.2460 | Hardened steel | M24 x 2 | 36 | 13 | 28 | 7 | 3 | 14 | 25,3 | 87 | M8 | 35 | 16,5 | 9 | 22 | 60 | M24x2 | giratório | bilateral | Grampo | 6 | 4 | |||
PAK2430.1640
Double-sided clamp, Rotating, D=M16X1, L=40, Hardened steel
Material = Hardened steel
Thread = M16 x 1
D2 = 25
SW1 = 10
L1 = 18
H1 = 5
SW2 = 2,5
D3 = 10
Binário de aperto máx. Nm = 10,4
H = 61
D1 = M6
B = 25
F máx. kN = 8,97
S = 7
A = 15
L = 40
D = M16x1
Versão 2 = giratório
Versão 1 = bilateral
Denominação = Grampo
S1 = 4,5
S2 = 2,5
PAK2430.2460
Double-sided clamp, Rotating, D=M24X2, L=60, Hardened steel
Material = Hardened steel
Thread = M24 x 2
D2 = 36
SW1 = 13
L1 = 28
H1 = 7
SW2 = 3
D3 = 14
Binário de aperto máx. Nm = 25,3
H = 87
D1 = M8
B = 35
F máx. kN = 16,5
S = 9
A = 22
L = 60
D = M24x2
Versão 2 = giratório
Versão 1 = bilateral
Denominação = Grampo
S1 = 6
S2 = 4