Electromagnet, Rectangular, B=40, L=150, L2=75 steel

Material:
Steel housing.
Coil body in plastic.
Note:
Electromagnets are operated with direct current. This generates a magnetic field in the core through the coil. After the voltage is switched off, the force field disappears again.

Electromagnets are fastened using the threads on the rear. The number of threaded holes is different. Distance L2 is the respective distance between the threaded holes.
The electrical connection is made via a DIN valve connector in accordance with EN 175301-803 (formerly DIN 43650). The PINs are installed to clamp the wires directly.

The clamping forces specified may be lower, depending on the material thickness and the surface roughness of the material.
Application:
Electromagnets are used to hold, support and clamp ferromagnetic workpieces.
Technical data:
Voltage: 24V DC.
Protection class: up to IP 65.
Temperature range: up to 180 °C (insulation class H).
Operating time: 100%.