PAK1751.1007001
Fixed jaw DS for clamping system M SB=100 L=70, Form A smooth tool steel hardened and polished
Estimated delivery: On request
Material:
Tool steel.
Version:
hardened and ground (HRC 55 ±2).
Note:
The lateral mounting holes serve to attach stops for workpieces.
The two mounting holes in the clamping surfaces allow additional clamping rails to be fitted in order to achieve an ideal clamping depth of the parts.
Application:
The DS fixed jaws are positioned on the clamping rails according to the clamping situation. A form-fit connection is achieved, via the toothed surface, by tightening the clamping screw. Fixed jaws with two clamping screws are preferably used for machining processes with higher forces.
Advantages:
The positions of the fixed stops can be adjusted precisely using the lateral scale on the rails and fixed jaws.
Scope of delivery:
Fixed jaw of DS.
Clamping screw.
T-nuts.
Tool steel.
Version:
hardened and ground (HRC 55 ±2).
Note:
The lateral mounting holes serve to attach stops for workpieces.
The two mounting holes in the clamping surfaces allow additional clamping rails to be fitted in order to achieve an ideal clamping depth of the parts.
Application:
The DS fixed jaws are positioned on the clamping rails according to the clamping situation. A form-fit connection is achieved, via the toothed surface, by tightening the clamping screw. Fixed jaws with two clamping screws are preferably used for machining processes with higher forces.
Advantages:
The positions of the fixed stops can be adjusted precisely using the lateral scale on the rails and fixed jaws.
Scope of delivery:
Fixed jaw of DS.
Clamping screw.
T-nuts.
| Material | Tool steel |
|---|---|
| Finishing | Hardened and polished |
| B2 | 26 |
|---|---|
| L | 70 |
| H | 43 |
| H1 | 22 |
| L2 | 35 |
| B1 | 64 |
| Largura de ranhura | 10 |
| D1 | M8 |
| D Rosca fêmea | M8 |
| B | 100 |
| L3 | 30 |
| Forma | A |
| Versão 1 | para sistema de fixação múltiplo |
| Denominação | Mordente fixo de DS |
| D3 | M14x1,5x50 |
| Tipo de forma | liso |
| Adequado para larguras de sistemas | 100 |
Product Variations
| Model | Material | Finishing | B2 | L | H | H1 | L2 | B1 | Largura de ranhura | D1 | D Rosca fêmea | B | L3 | Forma | Versão 1 | Denominação | D3 | Tipo de forma | Adequado para larguras de sistemas | Stock | Quantity | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PAK1751.0504401 PAK1751.0504401 | Tool steel | Hardened and polished | - | 44 | 25 | 12,5 | 24 | 30 | 5 | M6 | M5 | 50 | 18 | A | para sistema de fixação múltiplo | Mordente fixo de DS | M10x30 | liso | 50 | |||
| PAK1751.0726501 PAK1751.0726501 | Tool steel | Hardened and polished | - | 65 | 40 | 21,5 | 35 | 44 | 8 | M6 | M6 | 72 | 25 | A | para sistema de fixação múltiplo | Mordente fixo de DS | M14x1,5x50 | liso | 72 | |||
| PAK1751.1007001 PAK1751.1007001 | Tool steel | Hardened and polished | 26 | 70 | 43 | 22 | 35 | 64 | 10 | M8 | M8 | 100 | 30 | A | para sistema de fixação múltiplo | Mordente fixo de DS | M14x1,5x50 | liso | 100 | |||
PAK1751.0504401
Fixed jaw DS for clamping system M SB=50 L=44, Form A smooth tool steel hardened and polished
Material = Tool steel
Finishing = Hardened and polished
L = 44
H = 25
H1 = 12,5
L2 = 24
B1 = 30
Largura de ranhura = 5
D1 = M6
D Rosca fêmea = M5
B = 50
L3 = 18
Forma = A
Versão 1 = para sistema de fixação múltiplo
Denominação = Mordente fixo de DS
D3 = M10x30
Tipo de forma = liso
Adequado para larguras de sistemas = 50
PAK1751.0726501
Fixed jaw DS for clamping system M SB=72 L=65, Form A smooth tool steel hardened and polished
Material = Tool steel
Finishing = Hardened and polished
L = 65
H = 40
H1 = 21,5
L2 = 35
B1 = 44
Largura de ranhura = 8
D1 = M6
D Rosca fêmea = M6
B = 72
L3 = 25
Forma = A
Versão 1 = para sistema de fixação múltiplo
Denominação = Mordente fixo de DS
D3 = M14x1,5x50
Tipo de forma = liso
Adequado para larguras de sistemas = 72
PAK1751.1007001
Fixed jaw DS for clamping system M SB=100 L=70, Form A smooth tool steel hardened and polished
Material = Tool steel
Finishing = Hardened and polished
B2 = 26
L = 70
H = 43
H1 = 22
L2 = 35
B1 = 64
Largura de ranhura = 10
D1 = M8
D Rosca fêmea = M8
B = 100
L3 = 30
Forma = A
Versão 1 = para sistema de fixação múltiplo
Denominação = Mordente fixo de DS
D3 = M14x1,5x50
Tipo de forma = liso
Adequado para larguras de sistemas = 100