PAK1750.0724023
Fixed jaw ES for clamping system M SB=72 L=40, Form C stepped tool steel hardened and
Estimated delivery: On request
Material:
Tool steel.
Version:
hardened and ground (HRC 55 ±2).
Note:
The lateral mounting holes serve to attach stops for workpieces.
The two mounting holes in the clamping surfaces allow additional clamping rails to be fitted in order to achieve an ideal clamping depth of the parts.
Application:
The ES (stainless steel) fixed jaws are positioned on the clamping rails according to the clamping situation. A form-fit connection is achieved via the toothed surface by tightening the clamping screw. In this way, high clamping forces of the clamping elements can be achieved. Thanks to the narrow design of the fixed jaw in ES, it is particularly suitable for clamping smaller parts in larger quantities. This allows low-cost machining of even larger series.
Advantages:
The positions of the fixed stops can be adjusted precisely using the lateral scale on the rails and fixed jaws.
Scope of delivery:
Fixed jaw of ES.
Clamping screw.
T-nuts.
Technical data:
Observe the maximum clamping force and tightening torque of the respective system width of the product families K1828, K1829 and K1830.
Tool steel.
Version:
hardened and ground (HRC 55 ±2).
Note:
The lateral mounting holes serve to attach stops for workpieces.
The two mounting holes in the clamping surfaces allow additional clamping rails to be fitted in order to achieve an ideal clamping depth of the parts.
Application:
The ES (stainless steel) fixed jaws are positioned on the clamping rails according to the clamping situation. A form-fit connection is achieved via the toothed surface by tightening the clamping screw. In this way, high clamping forces of the clamping elements can be achieved. Thanks to the narrow design of the fixed jaw in ES, it is particularly suitable for clamping smaller parts in larger quantities. This allows low-cost machining of even larger series.
Advantages:
The positions of the fixed stops can be adjusted precisely using the lateral scale on the rails and fixed jaws.
Scope of delivery:
Fixed jaw of ES.
Clamping screw.
T-nuts.
Technical data:
Observe the maximum clamping force and tightening torque of the respective system width of the product families K1828, K1829 and K1830.
| Material | Tool steel |
|---|---|
| Finishing | Hardened and polished |
| H2 | 2 |
|---|---|
| L | 40 |
| H | 40 |
| H1 | 21,5 |
| B1 | 44 |
| Largura de ranhura | 8 |
| D1 | M6 |
| D Rosca fêmea | M6 |
| L1 | 2 |
| B | 72 |
| Forma | C |
| Versão 1 | para sistema de fixação múltiplo |
| Denominação | Mordente fixo de ES |
| D3 | M14x1,5x50 |
| Tipo de forma | escalonada |
| Adequado para larguras de sistemas | 72 |
Product Variations
| Model | Material | Finishing | H2 | B2 | L | H | H1 | B1 | Largura de ranhura | D1 | D Rosca fêmea | L1 | B | Forma | Versão 1 | Denominação | D3 | Tipo de forma | Adequado para larguras de sistemas | Stock | Quantity | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PAK1750.0503023 PAK1750.0503023 | Tool steel | Hardened and polished | 2 | - | 30 | 25 | 12,5 | 30 | 5 | M6 | M5 | 2 | 50 | C | para sistema de fixação múltiplo | Mordente fixo de ES | M10x30 | escalonada | 50 | |||
| PAK1750.0503053 PAK1750.0503053 | Tool steel | Hardened and polished | 5 | - | 30 | 25 | 12,5 | 30 | 5 | M6 | M5 | 2 | 50 | C | para sistema de fixação múltiplo | Mordente fixo de ES | M10x30 | escalonada | 50 | |||
| PAK1750.0724023 PAK1750.0724023 | Tool steel | Hardened and polished | 2 | - | 40 | 40 | 21,5 | 44 | 8 | M6 | M6 | 2 | 72 | C | para sistema de fixação múltiplo | Mordente fixo de ES | M14x1,5x50 | escalonada | 72 | |||
| PAK1750.0724053 PAK1750.0724053 | Tool steel | Hardened and polished | 5 | - | 40 | 40 | 21,5 | 44 | 8 | M6 | M6 | 2 | 72 | C | para sistema de fixação múltiplo | Mordente fixo de ES | M14x1,5x50 | escalonada | 72 | |||
| PAK1750.1004423 PAK1750.1004423 | Tool steel | Hardened and polished | 2 | 26 | 44 | 43 | 22 | 64 | 10 | M8 | M8 | 2 | 100 | C | para sistema de fixação múltiplo | Mordente fixo de ES | M14x1,5x50 | escalonada | 100 | |||
| PAK1750.1004453 PAK1750.1004453 | Tool steel | Hardened and polished | 5 | 26 | 44 | 43 | 22 | 64 | 10 | M8 | M8 | 2 | 100 | C | para sistema de fixação múltiplo | Mordente fixo de ES | M14x1,5x50 | escalonada | 100 | |||
PAK1750.0503023
Fixed jaw ES for clamping system M SB=50 L=30, Form C stepped tool steel hardened and
Material = Tool steel
Finishing = Hardened and polished
H2 = 2
L = 30
H = 25
H1 = 12,5
B1 = 30
Largura de ranhura = 5
D1 = M6
D Rosca fêmea = M5
L1 = 2
B = 50
Forma = C
Versão 1 = para sistema de fixação múltiplo
Denominação = Mordente fixo de ES
D3 = M10x30
Tipo de forma = escalonada
Adequado para larguras de sistemas = 50
PAK1750.0503053
Fixed jaw ES for clamping system M SB=50 L=30, Form C stepped tool steel hardened and
Material = Tool steel
Finishing = Hardened and polished
H2 = 5
L = 30
H = 25
H1 = 12,5
B1 = 30
Largura de ranhura = 5
D1 = M6
D Rosca fêmea = M5
L1 = 2
B = 50
Forma = C
Versão 1 = para sistema de fixação múltiplo
Denominação = Mordente fixo de ES
D3 = M10x30
Tipo de forma = escalonada
Adequado para larguras de sistemas = 50
PAK1750.0724023
Fixed jaw ES for clamping system M SB=72 L=40, Form C stepped tool steel hardened and
Material = Tool steel
Finishing = Hardened and polished
H2 = 2
L = 40
H = 40
H1 = 21,5
B1 = 44
Largura de ranhura = 8
D1 = M6
D Rosca fêmea = M6
L1 = 2
B = 72
Forma = C
Versão 1 = para sistema de fixação múltiplo
Denominação = Mordente fixo de ES
D3 = M14x1,5x50
Tipo de forma = escalonada
Adequado para larguras de sistemas = 72
PAK1750.0724053
Fixed jaw ES for clamping system M SB=72 L=40, Form C stepped tool steel hardened and
Material = Tool steel
Finishing = Hardened and polished
H2 = 5
L = 40
H = 40
H1 = 21,5
B1 = 44
Largura de ranhura = 8
D1 = M6
D Rosca fêmea = M6
L1 = 2
B = 72
Forma = C
Versão 1 = para sistema de fixação múltiplo
Denominação = Mordente fixo de ES
D3 = M14x1,5x50
Tipo de forma = escalonada
Adequado para larguras de sistemas = 72
PAK1750.1004423
Fixed jaw ES for clamping system M SB=100 L=44, Form C stepped tool steel hardened and
Material = Tool steel
Finishing = Hardened and polished
H2 = 2
B2 = 26
L = 44
H = 43
H1 = 22
B1 = 64
Largura de ranhura = 10
D1 = M8
D Rosca fêmea = M8
L1 = 2
B = 100
Forma = C
Versão 1 = para sistema de fixação múltiplo
Denominação = Mordente fixo de ES
D3 = M14x1,5x50
Tipo de forma = escalonada
Adequado para larguras de sistemas = 100
PAK1750.1004453
Fixed jaw ES for clamping system M SB=100 L=44, Form C stepped tool steel hardened and
Material = Tool steel
Finishing = Hardened and polished
H2 = 5
B2 = 26
L = 44
H = 43
H1 = 22
B1 = 64
Largura de ranhura = 10
D1 = M8
D Rosca fêmea = M8
L1 = 2
B = 100
Forma = C
Versão 1 = para sistema de fixação múltiplo
Denominação = Mordente fixo de ES
D3 = M14x1,5x50
Tipo de forma = escalonada
Adequado para larguras de sistemas = 100