PAK2188.101015
Floating clamp form B replaceable clamping jaws, D=M10, S=15, Hardened steel, 1.0503 black carbonitrided + black
Estimated delivery: On request
Material:
Main body and jaws in steel.
Aluminium stop.
Version:
Main body black burnished.
Carbonitrided jaws, burnished black.
End stop, black anodised.
Note:
The floating support is used to clamp and support protruding clamping points on components. Prevents vibrations and deflection during machining.
Operating mode:
1. Press the floating clamp down.
2. Turn the jaws until they reach the stop. The floating jaws of the floating clamp must now be in contact with the underside of the workpiece.
3. Tighten the floating clamp with the hexagon nut (observe the minimum and maximum torque). During clamping, the workpiece is clamped and supported at the same time.
4. To loosen, carry out the procedure in the reverse order.
Mounting:
Set the height range and the angle of rotation and fasten the floating clamp to the bracket using the holes (D1).
When setting the height, a generous margin upwards must be taken into account.
Form B: for special clamping applications, the standard jaw can be modified or replaced.
Drawing note:
1) Replaceable clamping jaw
2) Cheese head screw M6 ISO 4762
3) Clamping interface for the clamping jaw
Main body and jaws in steel.
Aluminium stop.
Version:
Main body black burnished.
Carbonitrided jaws, burnished black.
End stop, black anodised.
Note:
The floating support is used to clamp and support protruding clamping points on components. Prevents vibrations and deflection during machining.
Operating mode:
1. Press the floating clamp down.
2. Turn the jaws until they reach the stop. The floating jaws of the floating clamp must now be in contact with the underside of the workpiece.
3. Tighten the floating clamp with the hexagon nut (observe the minimum and maximum torque). During clamping, the workpiece is clamped and supported at the same time.
4. To loosen, carry out the procedure in the reverse order.
Mounting:
Set the height range and the angle of rotation and fasten the floating clamp to the bracket using the holes (D1).
When setting the height, a generous margin upwards must be taken into account.
Form B: for special clamping applications, the standard jaw can be modified or replaced.
Drawing note:
1) Replaceable clamping jaw
2) Cheese head screw M6 ISO 4762
3) Clamping interface for the clamping jaw
| Material | Hardened steel |
|---|---|
| Color | Black |
| Finishing | Carbonitrided + black oxidised |
| Cor dos componentes | anodizado preto |
|---|---|
| Forma | B |
| Material dos componentes | alumínio |
| Denominação | Fixador flutuante |
| Chave de aço | 1.0503 |
| H1 | 32 |
| B1 | 31 |
| Capacidade de carga N | 8000 |
| D1 | 12,8 |
| A | 65 |
| Tipo de forma | Mordentes de aperto permutáveis |
| Curso S | 15 |
| H mín. | 85 |
| H máx. | 95 |
| Força de aperto N | 8000 |
| Curso máx. de aperto | 15 |
| B | 43,5 |
| B2 | 19,5 |
| H2 | 45 |
| SW | 17 |
| H3 | 26,5 |
| H4 | 14,5 |
| D para parafuso | M10 |
| L | 88 |
| H5 | 7,9 |
| B3 | 10 |
| B4 | 18,5 |
| M | 21,6 |
Product Variations
| Model | Material | Color | Finishing | Cor dos componentes | Forma | Material dos componentes | Denominação | Chave de aço | H1 | B1 | Capacidade de carga N | D1 | A | Tipo de forma | Curso S | H mín. | H máx. | Força de aperto N | Curso máx. de aperto | B | B2 | H2 | SW | H3 | H4 | D para parafuso | L | H5 | B3 | B4 | M | Stock | Quantity | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PAK2188.101015 PAK2188.101015 | Hardened steel | Black | Carbonitrided + black oxidised | anodizado preto | B | alumínio | Fixador flutuante | 1.0503 | 32 | 31 | 8000 | 12,8 | 65 | Mordentes de aperto permutáveis | 15 | 85 | 95 | 8000 | 15 | 43,5 | 19,5 | 45 | 17 | 26,5 | 14,5 | M10 | 88 | 7,9 | 10 | 18,5 | 21,6 | |||
PAK2188.101015
Floating clamp form B replaceable clamping jaws, D=M10, S=15, Hardened steel, 1.0503 black carbonitrided + black
Material = Hardened steel
Color = Black
Finishing = Carbonitrided + black oxidised
Cor dos componentes = anodizado preto
Forma = B
Material dos componentes = alumínio
Denominação = Fixador flutuante
Chave de aço = 1.0503
H1 = 32
B1 = 31
Capacidade de carga N = 8000
D1 = 12,8
A = 65
Tipo de forma = Mordentes de aperto permutáveis
Curso S = 15
H mín. = 85
H máx. = 95
Força de aperto N = 8000
Curso máx. de aperto = 15
B = 43,5
B2 = 19,5
H2 = 45
SW = 17
H3 = 26,5
H4 = 14,5
D para parafuso = M10
L = 88
H5 = 7,9
B3 = 10
B4 = 18,5
M = 21,6