Force sensor for quick clamps TA.8, Black anodised aluminium

Smart Products offer the added value of being able to detect electronically the actuation status of various clamping and support elements.

The force sensor for quick clamps allows the force with which a workpiece is clamped to be compared with a previously defined nominal value.
The setting of the nominal value is described in the operating instructions.

It is mounted between a mechanical quick clamp and the clamping fixture.

If the force sensor is connected to the Bluetooth module K1831 via the integrated USB type C port, it transmits the sensor status via wireless connection. The signal can then be received and processed, for example, by the gateway K1494.
In addition, the integrated LED display of the Bluetooth module indicates the status of the clamping element.

The force sensor is supplied with electrical power by the Bluetooth module, which can be replaced if necessary without reconfiguration.
Material:
Aluminium force sensor EN AW-6082.
Connector housing in steel.
Version:
Force sensor, black anodised.
Burnished plug housing.
Order example:
K1825.08
Note:
The force sensor allows the force with which a workpiece is clamped to be compared with a previously defined nominal value. The adjustment of the nominal value is described in the operating instructions. If the force sensor is equipped with a Bluetooth module, the force can be recorded and processed. The force sensor is supplied with power via the Bluetooth module, which can be replaced if necessary without reconfiguration. The Bluetooth module K1831 can be connected to the force sensor via USB Type C.
Application:
The force sensor can be used to compare the clamping force of a mechanical quick clamp with a nominal value.
The operator can easily monitor when the clamping force has been reached using the LED display on the Bluetooth module.
Temperature range:
0 °C to +65 °C.
Mounting:
The force sensor is fixed to the assembly table with ISO 4762 / DIN 912 cylinder head screws through the hole D1. Only then can the quick-action clamp be fastened to the force sensor with screws through the holes D2.
Accessories:
Bluetooth module K1831.
Gateway K1494.

Suitable for K1825.06:
K0660.004001
K0660.004000
K0660.004003
K0660.106001
K0660.106000
K0660.106003
K0660.006101
K0660.006100
K0660.006103
K0660.106101
K0660.106100
K0660.106103
K0662.006001
K0662.006000
K0662.006003
K0662.106001
K0662.106000
K0662.106003
K0662.006101
K0662.006100
K0662.006103
K0662.106101
K0662.106100
K0662.106103
K1255.001600
K1255.001800
K1255.101600
K1255.101800

Suitable for K1825.08:
K0660.008001
K0660.008000
K0660.008003
K0660.108001
K0660.108000
K0660.108003
K0660.008101
K0660.008100
K0660.008103
K0660.108101
K0660.108100
K0660.108103
K0662.008001
K0662.008000
K0662.008003
K0662.108001
K0662.108000
K0662.108003
K0662.008101
K0662.008100
K0662.008103
K0662.108101
K0662.108100
K0662.108103
K1255.002400
K1255.002600
K1255.102400
K1255.102600
Technical data:
See Downloads, Technical note.
Safety:
Force sensors are not suitable for the protection of persons.
Drawing note:
1) Force sensor
2) USB type C socket
3) Clamping fixture