PAK2397.024X40000
Four-lip profile, L=40000, H=24, Black EPDM
Estimated delivery: On request
EPDM sponge rubber sealing profiles for installation in sealing channels, grooves or U-profiles.
Four-lip profiles reliably seal and protect components against external influences.
Material:
EPDM sponge rubber.
Version:
black.
Note:
The groove width must not be less than 8,6 mm.
H1= Chamfering.
Type tested in accordance with UL guidelines 157 and UL 50E.
For optimum function, the seal must be able to move freely and should ideally be supported only by the two centre bars.
Observe the tolerance specifications in accordance with DIN ISO 3302-01.
Application:
- Distribution cabinet construction
- Mechanical and apparatus engineering
- Automotive industry
- Construction industry and window construction
Mounting:
Simple, quick and easy installation. When pressed in by hand, the four-lipped profile is secured in a gap or channel between two edges. The side bars prevent the profile from falling out.
Advantages:
Large tolerance compensation with light contact pressure.
The seal works in both directions, with positive and negative pressure.
No distortion at corners with small radii.
On request:
Other lengths.
Drawing note:
1) Clamping range
2) Uncompressed state
3) Compressed state
Four-lip profiles reliably seal and protect components against external influences.
Material:
EPDM sponge rubber.
Version:
black.
Note:
The groove width must not be less than 8,6 mm.
H1= Chamfering.
Type tested in accordance with UL guidelines 157 and UL 50E.
For optimum function, the seal must be able to move freely and should ideally be supported only by the two centre bars.
Observe the tolerance specifications in accordance with DIN ISO 3302-01.
Application:
- Distribution cabinet construction
- Mechanical and apparatus engineering
- Automotive industry
- Construction industry and window construction
Mounting:
Simple, quick and easy installation. When pressed in by hand, the four-lipped profile is secured in a gap or channel between two edges. The side bars prevent the profile from falling out.
Advantages:
Large tolerance compensation with light contact pressure.
The seal works in both directions, with positive and negative pressure.
No distortion at corners with small radii.
On request:
Other lengths.
Drawing note:
1) Clamping range
2) Uncompressed state
3) Compressed state
| Material | EPDM |
|---|---|
| Color | Black |
| H3 | 18 |
|---|---|
| L | 40000 |
| H | 24 |
| H1 | 22 |
| B1 | 10,7 |
| H4 | 4 |
| B | 8,6 |
| Denominação | Perfil de quatro lábios |
| Área de fixação mm | 8,6 |
| H2 | 2 |
