Guide pin form B with clamping lever, D=28, H=168, Burnished steel

Material:
Zinc die-cast lever handle according to DIN EN 12844.
Centring pin and clamping wedge, steel 1.0715.
Clamping ring made of steel.
Version:
Black lever handle, plastic coating.
Phosphated centring pin and clamping ring.
Clamping wedges with oxidised finish.
Laser measuring scale.
Note:
When the clamping lever is turned, both clamping wedges are tensioned in the bore. By means of the continuously adjustable clamping rings, one or more elements for lashing and lifting loads of different thicknesses are firmly secured.
Application:
Clamping locating pins are designed for the optimum fastening of conventional stop elements on materials of different thicknesses on perforated tables/welding tables with holes of 16 mm or 28 mm diameter.
Advantages:
Clamping range adjustable between 0-36 mm and 0-75 mm, without gaps.
Insensitive to the diameter and surface quality of the bore (up to H12).
Clamping range easily pre-set by means of a scale.
Fastening in the bore without damaging the surface.
Downward clamping force effect, also applicable to tables with thinner thicknesses (≥8 mm or ≥4 mm).
Compatible with conventional limit stop elements.