PAK2551.1222
Heavy-duty compression clamp, Diamond surface, D=22, Stainless steel, Components: stainless steel
Estimated delivery: On request
Compression clamps offer a convenient, simple and quick way of clamping or releasing mechanical parts such as flat rods or shafts. They are ideal for applications in mechanical and production engineering where repeated handling is often required. Compression clamps are easy to install and allow precise adjustment and secure support.
Material:
Stainless steel housing and gripper.
Steel pin.
Lever in stainless steel.
Version:
Housing, lever and smooth gripper, untreated surface.
Zinc-plated gripper insert.
Nickel-plated pin.
Note:
Fixing screws M2 or M3 in stainless steel are supplied.
Thoroughly degrease all contact surfaces.
Do not move the jammed bar or shaft.
Observe the recommended clamping range (5,9 - 6,3 mm).
Excessive shocks or vibrations can cause the clamped object to become misaligned.
Operating mode:
Make sure that the compression clamp is in the untensioned position. Align the flat rod or shaft to the unstressed position. Turn the lever 90°. When fully clamped, the marking lines are aligned and a click signal can be heard.
Accessories:
Aluminium clamping rings for the compression clamp K2552.
Drawing note:
1) Mounting option 1 for flat rods
2) Mounting option 2 for shafts
3) Mounting option 3 for flat shafts
4) Tensioned position
5) Untensioned position
6) Countersink diameter
7) Suitable for fixing screws (hexagon socket) M4
8) H4 = Recommended clamping range (clamping stroke 5,8 - 6,5)
9) Minimum dimensions for mounting compression clamps
10) Flat steel
11) H6 = Flat steel thickness (0 -0,2), to be determined by the customer
12) Shaft
13) Clamping ring diameter: shaft diameter +0,1 +0,2
14) D5 = shaft diameter (recommended tolerance: f8, g6, h5-h9), to be determined by the customer
15) Flat shaft
Material:
Stainless steel housing and gripper.
Steel pin.
Lever in stainless steel.
Version:
Housing, lever and smooth gripper, untreated surface.
Zinc-plated gripper insert.
Nickel-plated pin.
Note:
Fixing screws M2 or M3 in stainless steel are supplied.
Thoroughly degrease all contact surfaces.
Do not move the jammed bar or shaft.
Observe the recommended clamping range (5,9 - 6,3 mm).
Excessive shocks or vibrations can cause the clamped object to become misaligned.
Operating mode:
Make sure that the compression clamp is in the untensioned position. Align the flat rod or shaft to the unstressed position. Turn the lever 90°. When fully clamped, the marking lines are aligned and a click signal can be heard.
Accessories:
Aluminium clamping rings for the compression clamp K2552.
Drawing note:
1) Mounting option 1 for flat rods
2) Mounting option 2 for shafts
3) Mounting option 3 for flat shafts
4) Tensioned position
5) Untensioned position
6) Countersink diameter
7) Suitable for fixing screws (hexagon socket) M4
8) H4 = Recommended clamping range (clamping stroke 5,8 - 6,5)
9) Minimum dimensions for mounting compression clamps
10) Flat steel
11) H6 = Flat steel thickness (0 -0,2), to be determined by the customer
12) Shaft
13) Clamping ring diameter: shaft diameter +0,1 +0,2
14) D5 = shaft diameter (recommended tolerance: f8, g6, h5-h9), to be determined by the customer
15) Flat shaft
| Material | Stainless steel |
|---|
| D4 | 26 |
|---|---|
| Versão 1 | versão pesada |
| Material dos componentes | aço inoxidável |
| Denominação | Grampo de compressão |
| A3 | 35 |
| H | 52 |
| H1 | 10 |
| B1 | ≥32 |
| D1 | 26 |
| A | 35 |
| D2 | 45 |
| Tipo de forma | Superfície de diamante |
| A1 | 41 |
| B | 32 |
| Força de aperto N | 1100 |
| D3 | 9,5 |
| D | 22 |
| H2 | 4 |
| H3 | 5,7 |
| L | 60 |
| H4 | 5,9-6,3 |
| H5 | ≥4 |
| M | M4 |
| A2 | ≥45 |
Product Variations
| Model | Material | D4 | Versão 1 | Material dos componentes | Denominação | A3 | H | H1 | B1 | D1 | A | D2 | Tipo de forma | A1 | B | Força de aperto N | D3 | D | H2 | H3 | L | H4 | H5 | M | A2 | Stock | Quantity | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PAK2551.1122 PAK2551.1122 | Stainless steel | 26 | versão pesada | aço inoxidável | Grampo de compressão | 35 | 52 | 10 | ≥32 | 26 | 35 | 45 | superfície lisa | 41 | 32 | 1100 | 9,5 | 22 | 4 | 5,7 | 60 | 5,9-6,3 | ≥4 | M4 | ≥45 | |||
| PAK2551.1222 PAK2551.1222 | Stainless steel | 26 | versão pesada | aço inoxidável | Grampo de compressão | 35 | 52 | 10 | ≥32 | 26 | 35 | 45 | Superfície de diamante | 41 | 32 | 1100 | 9,5 | 22 | 4 | 5,7 | 60 | 5,9-6,3 | ≥4 | M4 | ≥45 | |||
PAK2551.1122
Heavy-duty compression clamp, Smooth surface, D=22, Stainless steel, Components: stainless steel
Material = Stainless steel
D4 = 26
Versão 1 = versão pesada
Material dos componentes = aço inoxidável
Denominação = Grampo de compressão
A3 = 35
H = 52
H1 = 10
B1 = ≥32
D1 = 26
A = 35
D2 = 45
Tipo de forma = superfície lisa
A1 = 41
B = 32
Força de aperto N = 1100
D3 = 9,5
D = 22
H2 = 4
H3 = 5,7
L = 60
H4 = 5,9-6,3
H5 = ≥4
M = M4
A2 = ≥45
PAK2551.1222
Heavy-duty compression clamp, Diamond surface, D=22, Stainless steel, Components: stainless steel
Material = Stainless steel
D4 = 26
Versão 1 = versão pesada
Material dos componentes = aço inoxidável
Denominação = Grampo de compressão
A3 = 35
H = 52
H1 = 10
B1 = ≥32
D1 = 26
A = 35
D2 = 45
Tipo de forma = Superfície de diamante
A1 = 41
B = 32
Força de aperto N = 1100
D3 = 9,5
D = 22
H2 = 4
H3 = 5,7
L = 60
H4 = 5,9-6,3
H5 = ≥4
M = M4
A2 = ≥45