PAK2515.060500502
Hinge, Black thermoplastic, Components: stainless steel 1.4305, B=50, A=50, A1=15, A2=15, D1=M06
Estimated delivery: On request
Material:
High-performance thermoplastic reinforced with glass fibre.
Shaft and threaded pin in stainless steel 1.4305.
Shaft and threaded pin in stainless steel 1.4404.
Version:
Hinge in black.
Shaft and threaded pin with untreated surface.
Note:
The load values stated for the hinges are non-binding reference values and do not take safety factors into account, and therefore exclude any liability. The data stated are for information purposes and do not guarantee properties in a legal sense.
The load values were determined under laboratory conditions. The correct application of the hinges is the sole responsibility of the user.
Factors such as the wide variety of materials to which the hinges are fastened, the types of fastening, the climatic conditions and wear can influence the values determined.
Accessories:
K1145 Hexagon nuts DIN 934.
K2099 Washers DIN 433 in steel or stainless steel.
High-performance thermoplastic reinforced with glass fibre.
Shaft and threaded pin in stainless steel 1.4305.
Shaft and threaded pin in stainless steel 1.4404.
Version:
Hinge in black.
Shaft and threaded pin with untreated surface.
Note:
The load values stated for the hinges are non-binding reference values and do not take safety factors into account, and therefore exclude any liability. The data stated are for information purposes and do not guarantee properties in a legal sense.
The load values were determined under laboratory conditions. The correct application of the hinges is the sole responsibility of the user.
Factors such as the wide variety of materials to which the hinges are fastened, the types of fastening, the climatic conditions and wear can influence the values determined.
Accessories:
K1145 Hexagon nuts DIN 934.
K2099 Washers DIN 433 in steel or stainless steel.
| Material | Thermoplastic |
|---|---|
| Color | Black |
| S | 6 |
|---|---|
| VPE | 1 |
| A4 | 25 |
| Modo de fixação | rosca macho |
| H | 12 |
| B1 | 30 |
| A2 | 15 |
| A3 | 25 |
| Chave de aço | 1.4305 |
| A1 | 15 |
| A | 50 |
| L1 | 12 |
| D1 | M6 |
| B | 50 |
| Material dos componentes | aço inoxidável |
| Denominação | Dobradiça |
| Tipo de produto | Dobradiça |
| Ângulo de abertura | 240° |
