PAK2101.86840
Hinge for aluminium profiles, With rib 86X84, Anodised aluminium, A1=27, 5, A2=27, 5, A3=43, A4=43
Estimated delivery: On request
Material:
Hinge in aluminium.
Stainless steel shaft.
Cover caps in glass-fibre-reinforced thermoplastic.
Version:
Anodised hinge.
Shaft surface untreated.
Cover cap in white aluminium.
Order example:
K2101.86841
Note:
Hinges for flat elements, panels and aluminium profiles, removable.
The hinges can be mounted on the right-hand and left-hand side.
Rotation of 360°.
The load values stated for the hinges are non-binding reference values and do not take safety factors into account, and therefore exclude any liability. The data stated are for information purposes and do not guarantee properties in a legal sense.
The load values were determined under laboratory conditions. The correct application of the hinges is the sole responsibility of the user.
Factors such as the wide variety of materials to which the hinges are fastened, the types of fastening, the climatic conditions and wear can influence the values determined.
Mounting set:
2x hexagon socket countersunk head screws DIN 7991 / ISO 10642.
2x rotating sliding nuts with type I bar.
Hinge in aluminium.
Stainless steel shaft.
Cover caps in glass-fibre-reinforced thermoplastic.
Version:
Anodised hinge.
Shaft surface untreated.
Cover cap in white aluminium.
Order example:
K2101.86841
Note:
Hinges for flat elements, panels and aluminium profiles, removable.
The hinges can be mounted on the right-hand and left-hand side.
Rotation of 360°.
The load values stated for the hinges are non-binding reference values and do not take safety factors into account, and therefore exclude any liability. The data stated are for information purposes and do not guarantee properties in a legal sense.
The load values were determined under laboratory conditions. The correct application of the hinges is the sole responsibility of the user.
Factors such as the wide variety of materials to which the hinges are fastened, the types of fastening, the climatic conditions and wear can influence the values determined.
Mounting set:
2x hexagon socket countersunk head screws DIN 7991 / ISO 10642.
2x rotating sliding nuts with type I bar.
| Material | Aluminum |
|---|---|
| Finishing | Anodised |
| B2 | 40 |
|---|---|
| S | 3,8 |
| F1 N | 200 |
| Tipo | B & I |
| A4 | 43 |
| Modo de fixação | furos de fixação |
| B1 | 81 |
| D | 6,1 |
| A2 | 27,5 |
| N | 8 |
| BN | 8 |
| A3 | 43 |
| A1 | 27,5 |
| A | 86 |
| F2 N | 200 |
| B3 | 41 |
| D1 | 14,2 |
| B | 84 |
| Versão 1 | para perfis de alumínio |
| Denominação | Dobradiça |
| Tipo de produto | interior |
