PAK1897.0812006011
Hinge form A 120X60, Mounting perforations, Chrome-plated zinc die-cast, Components: stainless steel
Estimated delivery: On request
Material:
Hinge in zinc die-cast.
Stainless steel shaft.
Version:
Hinge bead-blasted, chrome-plated or black.
Shaft surface untreated.
Note:
Hinges for inset doors.
The hinges can be installed on the right-hand and left-hand side.
*Points with holes on the underside, which can be drilled out if required.
The load values stated for the hinges are non-binding reference values and do not take safety factors into account, and therefore exclude any liability. The data stated are for information purposes and do not guarantee properties in a legal sense.
The load values were determined under laboratory conditions. The correct application of the hinges is the sole responsibility of the user.
Factors such as the wide variety of materials to which the hinges are fastened, the types of fastening, the climatic conditions and wear can influence the values determined.
Accessories:
Countersunk head screws with hexagon socket DIN EN ISO 10642 (K0708).
Hinge in zinc die-cast.
Stainless steel shaft.
Version:
Hinge bead-blasted, chrome-plated or black.
Shaft surface untreated.
Note:
Hinges for inset doors.
The hinges can be installed on the right-hand and left-hand side.
*Points with holes on the underside, which can be drilled out if required.
The load values stated for the hinges are non-binding reference values and do not take safety factors into account, and therefore exclude any liability. The data stated are for information purposes and do not guarantee properties in a legal sense.
The load values were determined under laboratory conditions. The correct application of the hinges is the sole responsibility of the user.
Factors such as the wide variety of materials to which the hinges are fastened, the types of fastening, the climatic conditions and wear can influence the values determined.
Accessories:
Countersunk head screws with hexagon socket DIN EN ISO 10642 (K0708).
| Material | Zamak |
|---|---|
| Color | Cromado |
| F1 N | 5500 |
|---|---|
| A6 | 23* |
| A4 | 60 |
| Modo de fixação | furos de fixação |
| H | 15 |
| B1 | 36 |
| A2 | 45 |
| A3 | 60 |
| A1 | 45 |
| A5 | 23* |
| A | 120 |
| F2 N | 1300 |
| D1 | 8,4 |
| B | 60 |
| Forma | A |
| Material dos componentes | aço inoxidável |
| Denominação | Dobradiça |
| Tipo de produto | Dobradiça |
| Ângulo de abertura | 270° |
| S | 8 |
