PAK1964.26151503
Hinge form C with bolt/head and split pin 52X48, Stainless steel A4 1.4401 highly polished, Components: steel
Estimated delivery: On request
Hinges for flat elements, panels and aluminium profiles.
By removing the axle pins without tools, the hinge halves can be quickly separated and connected.
The hinges are used on covers, hoods or frames.
Can be used indoors and outdoors.
Material:
Stainless steel 1.4401.
Axle pin and accessories, stainless steel 1.4305.
Version:
Polished hinge.
Axle pin, key ring, untreated surface.
Note:
The load values stated for the hinges are non-binding reference values and do not take safety factors into account, and therefore exclude any liability. The data stated are for information purposes and do not guarantee properties in a legal sense.
The load data were determined under laboratory conditions. The correct application of the hinges is the sole responsibility of the user.
Factors such as the variety of materials to which the hinges are fastened, the types of fastening, the climatic conditions and wear can influence the values determined.
Advantages:
tool-free assembly/disassembly
On request:
Combinations with different hinge leaf lengths.
Scope of delivery:
Two hinge halves.
Selected axle pin and/or accessories.
Accessories:
K0776 Quick-release pin with retractable locking latch.
Headed pin ISO 2341.
Plug-in pins with key ring.
K1136 split pin DIN EN ISO 1234.
K0367 key ring.
Drawing note:
Form A: with quick-lock pin
Form B: with pin/head and key ring
Form C: with pin/head and split pin
2) Shaft pin
3) Split pin
4) Key ring
By removing the axle pins without tools, the hinge halves can be quickly separated and connected.
The hinges are used on covers, hoods or frames.
Can be used indoors and outdoors.
Material:
Stainless steel 1.4401.
Axle pin and accessories, stainless steel 1.4305.
Version:
Polished hinge.
Axle pin, key ring, untreated surface.
Note:
The load values stated for the hinges are non-binding reference values and do not take safety factors into account, and therefore exclude any liability. The data stated are for information purposes and do not guarantee properties in a legal sense.
The load data were determined under laboratory conditions. The correct application of the hinges is the sole responsibility of the user.
Factors such as the variety of materials to which the hinges are fastened, the types of fastening, the climatic conditions and wear can influence the values determined.
Advantages:
tool-free assembly/disassembly
On request:
Combinations with different hinge leaf lengths.
Scope of delivery:
Two hinge halves.
Selected axle pin and/or accessories.
Accessories:
K0776 Quick-release pin with retractable locking latch.
Headed pin ISO 2341.
Plug-in pins with key ring.
K1136 split pin DIN EN ISO 1234.
K0367 key ring.
Drawing note:
Form A: with quick-lock pin
Form B: with pin/head and key ring
Form C: with pin/head and split pin
2) Shaft pin
3) Split pin
4) Key ring
| Material | Stainless steel 316 |
|---|---|
| Finishing | High-gloss polished |
| B2 | 28 |
|---|---|
| F1 N | 700 |
| A4 | 26 |
| H | 9 |
| A2 | 15 |
| D3 | 14 |
| A3 | 26 |
| A1 | 15 |
| D2 | 6 |
| A | 52 |
| F2 N | 560 |
| D1 | 6,6 |
| B | 48 |
| Forma | C |
| Material dos componentes | aço inoxidável |
| Denominação | Dobradiça |
| Chave de aço | 1.4401 |
| Tipo de produto | Dobradiça |
| Superfície dos componentes | sem tratamento superficial |
| Tipo de forma | com pino/cabeça e cupilha |
| Modo de fixação | furos de fixação |
