PAK2103.58502
Hinge half for aluminium profiles 57, 7X50, Anodised aluminium, A1=30, 2
Estimated delivery: On request
Material:
Aluminium.
Version:
anodised part.
Order example:
K2103.28502
Note:
Hinge halves for flat elements and aluminium profiles.
The hinge halves can be mounted individually.
Rotation of 360°.
Fastening with countersunk head screws according to DIN 7991 / ISO 10642.
The load values stated for the hinges are non-binding reference values and do not take safety factors into account, and therefore exclude any liability. The data stated are for information purposes and do not guarantee properties in a legal sense.
The load values were determined under laboratory conditions. The correct application of the hinges is the sole responsibility of the user.
Factors such as the wide variety of materials to which the hinges are fastened, the types of fastening, the climatic conditions and wear can influence the values determined.
Accessories:
Shaft K2104.
Cover cap K2105.
Aluminium.
Version:
anodised part.
Order example:
K2103.28502
Note:
Hinge halves for flat elements and aluminium profiles.
The hinge halves can be mounted individually.
Rotation of 360°.
Fastening with countersunk head screws according to DIN 7991 / ISO 10642.
The load values stated for the hinges are non-binding reference values and do not take safety factors into account, and therefore exclude any liability. The data stated are for information purposes and do not guarantee properties in a legal sense.
The load values were determined under laboratory conditions. The correct application of the hinges is the sole responsibility of the user.
Factors such as the wide variety of materials to which the hinges are fastened, the types of fastening, the climatic conditions and wear can influence the values determined.
Accessories:
Shaft K2104.
Cover cap K2105.
| Material | Aluminum |
|---|---|
| Finishing | Anodised |
| B2 | 50 |
|---|---|
| S | 4 |
| F1 N | 100 |
| Modo de fixação | furos de fixação |
| D | 6,4 |
| A3 | 57,7 |
| A1 | 30,2 |
| D2 | 6,1 |
| F2 N | 150 |
| D1 | 10 |
| B4 | 30 |
| Versão 1 | para perfis de alumínio |
| Denominação | Metade da dobradiça |
| Tipo de produto | externa |
| Quantidade de furos | 2 |
