PAK1854.160823061
Hydraulic support element, Style A single, DK=16, HUB=8, Perforated steel channels
Estimated delivery: On request
Support elements are used during machining of the workpiece to prevent vibrations and deflections in the workpiece. Screw-in support elements can be mounted horizontally or vertically. The two mounting options allow space-saving positioning in clamping fixtures.
Hydraulic clamping can be combined with or separated from hydraulic tensioning.
Material:
Housing and piston in steel.
Version:
Burnished housing.
Hardened piston.
Operating mode:
Drilled channels.
Mounting:
See construction outline.
Advantages:
- Integrated metal scraper.
- Installation always by spring force.
- Low mounting dimensions.
- Horizontal/vertical mounting options.
- Separate/combined clamping with clamping process.
- Integrated Kantseal seal.
Scope of delivery:
Contains 1 pcs. Kantseal seal.
Technical data:
- Max. operating pressure: 500 bar.
- Permissible load at 500 bar: 9 kN.
- Max. oil pressure: 100 bar.
- Max. tightening torque: 60 Nm.
Drawing note:
1) Design contour
Hydraulic clamping can be combined with or separated from hydraulic tensioning.
Material:
Housing and piston in steel.
Version:
Burnished housing.
Hardened piston.
Operating mode:
Drilled channels.
Mounting:
See construction outline.
Advantages:
- Integrated metal scraper.
- Installation always by spring force.
- Low mounting dimensions.
- Horizontal/vertical mounting options.
- Separate/combined clamping with clamping process.
- Integrated Kantseal seal.
Scope of delivery:
Contains 1 pcs. Kantseal seal.
Technical data:
- Max. operating pressure: 500 bar.
- Permissible load at 500 bar: 9 kN.
- Max. oil pressure: 100 bar.
- Max. tightening torque: 60 Nm.
Drawing note:
1) Design contour
| Material | Steel |
|---|---|
| Finishing | Burnished |
| Força de tensão F máx. (N) | 23 |
|---|---|
| H2 | 9,5 |
| SW | 24 |
| SW2 | 17 |
| H3 | 10 |
| G | M30x1,5 |
| H | 72,5 |
| H1 | 55,5 |
| D | 28,2 |
| H4 | 6 |
| SW1 | 13 |
| H5 | 10 |
| Tipo de ligação | canais perfurados |
| Forma | A |
| Versão 1 | hidráulico |
| Denominação | Elemento de apoio |
| Tipo de forma | atuação única |
| Diâmetro do êmbolo | 16 |
| Curso | 8 |
| Força de mola mín. (N) | 10 |
| Caudal volumétrico máx. (cm³/s) | 25 |
Product Variations
| Model | Material | Finishing | Força de tensão F máx. (N) | H2 | SW | SW2 | H3 | G | H | H1 | D | H4 | SW1 | H5 | Tipo de ligação | Forma | Versão 1 | Denominação | Tipo de forma | Diâmetro do êmbolo | Curso | Força de mola mín. (N) | Caudal volumétrico máx. (cm³/s) | Stock | Quantity | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PAK1854.160823061 PAK1854.160823061 | Steel | Burnished | 23 | 9,5 | 24 | 17 | 10 | M30x1,5 | 72,5 | 55,5 | 28,2 | 6 | 13 | 10 | canais perfurados | A | hidráulico | Elemento de apoio | atuação única | 16 | 8 | 10 | 25 | |||
PAK1854.160823061
Hydraulic support element, Style A single, DK=16, HUB=8, Perforated steel channels
Material = Steel
Finishing = Burnished
Força de tensão F máx. (N) = 23
H2 = 9,5
SW = 24
SW2 = 17
H3 = 10
G = M30x1,5
H = 72,5
H1 = 55,5
D = 28,2
H4 = 6
SW1 = 13
H5 = 10
Tipo de ligação = canais perfurados
Forma = A
Versão 1 = hidráulico
Denominação = Elemento de apoio
Tipo de forma = atuação única
Diâmetro do êmbolo = 16
Curso = 8
Força de mola mín. (N) = 10
Caudal volumétrico máx. (cm³/s) = 25