Hydraulic swing clamp, Style B double, DK=25, HUB=10, Threaded connection steel

Swing clamps are designed for clamping fixtures in which the clamping points must be free when inserting or removing. Swing clamps work as single- or double-acting pull cylinders. Three housing types are available, as well as different drive types for the swing clamps. The clamping movement is initiated by a rotary movement combined with a superimposed lifting movement. The actual clamping stroke then takes place in a linear movement. A variety of options is available with a swivel angle to the left or right of 90°. Swing clamps are durable as they have a metal wiper for protection against chips. In addition, the overload protection protects the rotation mechanism against damage in the event of blockages during the rotation process.
Material:
Housing and piston in steel.
NBR seal.
Version:
Burnished housing.
Hardened piston.
Note:
If the permissible volumetric flow rate is exceeded on the swing clamp, a throttle check valve must be installed in series.
The permissible operating pressure of the swing clamps depends on the length of the clamping arm.
When mounting the clamping arms, they must be held in place to avoid damaging the linear ball guides of the swing clamps.
Depending on the ventilation connection, the sintered filter of the single-acting swing clamps must be replaced with a threaded plug.

The clamping arm for the swing clamp is included in the scope of delivery.

Observe the safety instructions.
Operating mode:
- Threaded connection.
- O-ring flange connection.
- Drilled channels.
Mounting:
See construction outline.
Advantages:
- Integrated metal scraper.
- Integrated overload protection.
- Collision-free access to the workpiece.
- Many variants.
- Pressure supply via various flexible connection options.
On request:
Larger piston diameters and strokes, other swivel angles, various supports for clamping arms with position monitoring.
Scope of delivery:
- 1 piece, screw or nut for clamping arm support included.
Accessories:
Clamping arm for swing clamp K1865.
Technical data:
Max. operating pressure: 500 bar.
Drawing note:
Form A: flange on top
Form B: flange at the bottom
Form C: screw-in thread

1) Design contour
2) See accessories
3) On single-acting cylinders, the connection is fitted with a sintered filter
4) rotatable anticlockwise
5) rotatable clockwise
6) clamp
7) Relaxing or venting on single-acting cylinders