Indexing plunger ECO with thread locking TA.1 M08, D=5, Style AP without latching groove without lock nut, Non-hardened stainless steel

Indexing plungers are used when it is necessary to prevent a change in the locking position due to lateral forces. It can only be moved to another locking position after the pin has been disengaged manually. If the pin is to remain withdrawn for a long period and the guided locking pin must be prevented from retracting, form CP should be used.

With the thread lock, the mounting depth can be adapted exactly to the existing components, so that no tapping is necessary.

Indexing plungers with standard metric thread and unpolished, unhardened locking guide pins are an economical alternative to the existing indexing plungers. However, this accuracy is sufficient for many applications. The lower manufacturing tolerances also make the products less sensitive to misalignment, which can occur when aligning the indexing plungers with the hole in the counterpart.
Material:
Steel version:
Threaded bush and locking guide pin in free-cutting steel.

Stainless steel version:
Threaded bush 1.4305.
Guide pin for locking 1.4034.

Thermoplastic mushroom head.
Thread-locking element in polyamide.

Version:
Steel version:
Blue passivated threaded bush.
Unhardened guide pin for locking, untreated surface.

Stainless steel version:
Threaded bush, untreated surface.
Unhardened guide pin for locking, untreated surface.

Dark grey mushroom head RAL 7021.

Blue thread-locking element.
Note:
The thread-locking compound is a polyamide locking coating applied selectively (spot).
On request:
Special versions and fine threads.