Indexing plunger Hygienic Design TA.1 M10, D=6, Style C with latching groove, Stainless steel 1.4404 non-hardened

Indexing plungers are used when it is necessary to prevent a change in the locking position due to lateral forces. The pin can only be moved to another locking position after it has been disengaged manually.
If the disengagement has to take place over a longer period of time and the guided locking pin must be prevented from returning, form C should be used.


The indexing plunger is suitable for use in the food industry. It is designed with a conical collar so that the screw connection can be sealed hygienically and securely with the sealing ring and washer Hygienic USIT®. The surfaces have a roughness depth of Ra < 0,8 µm, which prevents dirt particles from adhering and ensures easy cleaning.

Material:
Stainless steel part 1.4404.
Seals of 75 EPDM 295 (black) or 75 Fluoroprene® XP (blue).

Version:
Guide pin for locking, hardened or unhardened, untreated.
Temperature range:
75 EPDM 295: -40 °C to 150 °C.

75 Fluoroprene® XP: -15 °C to 200 °C.

Advantages:
Design in compliance with hygiene standards
Stainless steel 1.4404
Suitable for CIP/SIP cleaning
Resistant to polar and non-polar fluids as well as to flavouring substances
Certified according to DGUV test
Scope of delivery:
Indexing plunger including sealing ring and washer Hygienic USIT®.

Accessories:
Hygienic USIT® sealing rings and washers K1491.