PAK1698.0110611
Indexing plunger Hygienic Design TA.1 M10X1, D=6, Style A without latching groove, Stainless steel 1.4404 part
Estimated delivery: On request
Indexing plungers are used when it is necessary to prevent a change in the locking position due to lateral forces. The pin can only be moved to another locking position after it has been disengaged manually.
If the disengagement has to take place over a longer period of time and the guided locking pin must be prevented from returning, form C should be used.
The indexing plunger is suitable for use in the food industry. It is designed with a conical collar so that the screw connection can be sealed hygienically and securely with the sealing ring and washer Hygienic USIT®. The surfaces have a roughness depth of Ra
If the disengagement has to take place over a longer period of time and the guided locking pin must be prevented from returning, form C should be used.
The indexing plunger is suitable for use in the food industry. It is designed with a conical collar so that the screw connection can be sealed hygienically and securely with the sealing ring and washer Hygienic USIT®. The surfaces have a roughness depth of Ra
| Material | Stainless steel |
|---|---|
| Finishing | Hardened |
| Thread | M10 x 1 |
| F x 30° | 1,8 |
|---|---|
| Força de mola final F2 aprox. N | 45 |
| Força de mola inicial F1 aprox. N | 40 |
| L | 63,5 |
| D | 6 |
| L2 | 14 |
| SW1 | 12 |
| D3 | 22,3 |
| D2 | 33 |
| Curso S | 6 |
| L1 | 11 |
| D1 | M10x1 |
| L3 | 1,5 |
| Cor dos componentes | preto |
| Tamanho | 1 |
| Forma | A |
| Material dos componentes | aço inoxidável |
| Denominação | Pino de indexação |
| Chave de aço | 1.4404 |
| Tipo de forma | sem ranhura de engate |
