PAK0736.42105
Indexing plunger Premium version with guide pin for locking TA.1 D1=M10X1, D=5, Style B without latching groove with lock nut
Estimated delivery: On request
Indexing plungers are used when it is necessary to prevent a change in the locking position due to lateral forces. It can only be moved to another locking position after the pin has been disengaged manually. If the disengagement is carried out over a longer period of time and the guided locking pin must not return, form C or form D should be used.
Premium indexing plungers are characterised by the highest manufacturing requirements for the indexing plunger and the threaded bush. In addition, a centring feature has been added to the threaded bush, which can be used to increase positioning accuracy.
Material:
Steel version:
Threaded bush and locking guide pin in free-cutting steel.
Stainless steel version:
Threaded bush 1.4305.
Guide pin for locking 1.4034.
Thermoplastic mushroom head.
Thread-locking element in polyamide.
Version:
Steel version:
Burnished threaded bush.
Hardened, polished and burnished guide pin for locking.
Stainless steel version:
Threaded bush, untreated surface.
Hardened and polished guide pin for locking, untreated surface.
Mushroom-head knob in dark grey RAL 7021.
Note:
Under the influence of transverse forces, the centring tip must be used.
Mounting:
When using the centring tip, it is recommended to produce the fit in the receiving part before cutting the thread.
On request:
Special versions.
Accessories:
Matching cylindrical bush K0736.
Lock nut K0700.
Spacer rings K0665.
Premium indexing plungers are characterised by the highest manufacturing requirements for the indexing plunger and the threaded bush. In addition, a centring feature has been added to the threaded bush, which can be used to increase positioning accuracy.
Material:
Steel version:
Threaded bush and locking guide pin in free-cutting steel.
Stainless steel version:
Threaded bush 1.4305.
Guide pin for locking 1.4034.
Thermoplastic mushroom head.
Thread-locking element in polyamide.
Version:
Steel version:
Burnished threaded bush.
Hardened, polished and burnished guide pin for locking.
Stainless steel version:
Threaded bush, untreated surface.
Hardened and polished guide pin for locking, untreated surface.
Mushroom-head knob in dark grey RAL 7021.
Note:
Under the influence of transverse forces, the centring tip must be used.
Mounting:
When using the centring tip, it is recommended to produce the fit in the receiving part before cutting the thread.
On request:
Special versions.
Accessories:
Matching cylindrical bush K0736.
Lock nut K0700.
Spacer rings K0665.
| Material | Steel |
|---|---|
| Finishing | Hardened, ground and burnished |
| Thread | M10 x 1 |
| L4 | 3 |
|---|---|
| F x 30° | 1,3 |
| Força de mola final F2 aprox. N | 12 |
| Força de mola inicial F1 aprox. N | 5 |
| L | 43,5 |
| L2 | 7 |
| D | 5 |
| SW1 | 13 |
| D3 | 8 |
| D2 | 21 |
| L1 | 17 |
| D5 | 6 -0,01/-0,02 |
| D4 | 6 |
| D1 | M10x1 |
| L3 | 15 |
| Tamanho | 1 |
| Forma | B |
| Versão 2 | com pino de guia para bloqueio cilíndrico |
| Versão 1 | sem ranhura de engate |
| Material dos componentes | termoplástico |
| Denominação | Pino de indexação versão premium |
| SW2 | 17 |
| Cor dos componentes | grafite RAL 7021 |
| Classe de resistência | 5.8 |
| Curso S | 5 |
| Contraporca | com contraporca |
