PAK0339.03105
Indexing plunger TA.1 D1=M10X1, D=5, Style C with latching groove without lock nut, Stainless steel part
Estimated delivery: On request
Indexing plungers are used to prevent changes in the engagement position caused by transverse forces. Only after the pin has been withdrawn manually is it possible to move to another latching position. If the pin is to remain withdrawn for a long period and the guided locking pin must be prevented from retracting, forms C + D should be used.
Material:
Steel version:
Threaded bush and locking guide pin in free-cutting steel.
Stainless steel version:
Threaded bush 1.4305.
Hardened guide pin for locking 1.4034.
Unhardened guide pin for locking $s14035..
Thermoplastic mushroom head.
Version:
Steel version:
Burnished threaded bush.
Hardened, polished and burnished guide pin for locking.
Stainless steel version:
Threaded bush, untreated surface.
Hardened and polished guide pin for locking, untreated surface.
Unhardened, polished guide pin for locking, untreated surface.
Mushroom-head knob in black thermoplastic, grey RAL7021.
On request:
Special versions.
Material:
Steel version:
Threaded bush and locking guide pin in free-cutting steel.
Stainless steel version:
Threaded bush 1.4305.
Hardened guide pin for locking 1.4034.
Unhardened guide pin for locking $s14035..
Thermoplastic mushroom head.
Version:
Steel version:
Burnished threaded bush.
Hardened, polished and burnished guide pin for locking.
Stainless steel version:
Threaded bush, untreated surface.
Hardened and polished guide pin for locking, untreated surface.
Unhardened, polished guide pin for locking, untreated surface.
Mushroom-head knob in black thermoplastic, grey RAL7021.
On request:
Special versions.
| Material | Stainless steel |
|---|---|
| Finishing | Hardened |
| Thread | M10 x 1 |
| L | 47 |
|---|---|
| D2 | 21 |
| Força de mola inicial F1 aprox. N | 5 |
| D | 5 |
| L1 | 17 |
| Força de mola final F2 aprox. N | 12 |
| F x 30° | 1,3 |
| D1 | M10x1 |
| L3 | 15 |
| SW1 | 13 |
| L2 | 7 |
| Tamanho | 1 |
| Forma | C |
| Material dos componentes | termoplástico |
| Denominação | Pino de indexação |
| Cor dos componentes | grafite RAL 7021 |
| Versão 1 | com ranhura de engate |
| Tipo de produto | padrão |
| Cor da tampa | grafite RAL 7021 |
| Chave de aço | 1.4034 |
| Curso S | 5 |
| Contraporca | sem contraporca |
