PAK0338.6410584
Indexing plunger TA.1 D1=M10X1, D=5, Style D with latching groove with lock nut, Stainless steel 1.4404 nickel-plated
Estimated delivery: On request
Material:
Steel version:
Threaded bush and locking guide pin in free-cutting steel.
Stainless steel version A1:
Threaded bush 1.4305.
Hardened guide pin for locking 1.4034.
Unhardened guide pin for locking 1.4305.
Stainless steel version A4:
Threaded bush and locking guide pin 1.4404.
Thermoplastic mushroom head.
Version:
Steel version:
Burnished threaded bush.
Hardened, polished and burnished guide pin for locking.
Stainless steel version A1:
Threaded bush, untreated surface.
Hardened and polished guide pin for locking, untreated surface.
Unhardened and polished guide pin for locking, untreated surface.
Stainless steel version A4:
Threaded bush, untreated surface.
Polished guide pin for locking with electroless nickel plating.
Polished guide pin for locking, untreated surface.
Dark grey RAL 7021 or traffic red RAL 3020.
Note:
The materials used allow varied use.
For requirements with very high corrosion resistance, locking pins in stainless steel A4. are recommended
On request:
Special versions.
Steel version:
Threaded bush and locking guide pin in free-cutting steel.
Stainless steel version A1:
Threaded bush 1.4305.
Hardened guide pin for locking 1.4034.
Unhardened guide pin for locking 1.4305.
Stainless steel version A4:
Threaded bush and locking guide pin 1.4404.
Thermoplastic mushroom head.
Version:
Steel version:
Burnished threaded bush.
Hardened, polished and burnished guide pin for locking.
Stainless steel version A1:
Threaded bush, untreated surface.
Hardened and polished guide pin for locking, untreated surface.
Unhardened and polished guide pin for locking, untreated surface.
Stainless steel version A4:
Threaded bush, untreated surface.
Polished guide pin for locking with electroless nickel plating.
Polished guide pin for locking, untreated surface.
Dark grey RAL 7021 or traffic red RAL 3020.
Note:
The materials used allow varied use.
For requirements with very high corrosion resistance, locking pins in stainless steel A4. are recommended
On request:
Special versions.
| Material | Stainless steel |
|---|---|
| Finishing | Nickel plated |
| Thread | M10 x 1 |
| F x 30° | 1,3 |
|---|---|
| SW2 | 17 |
| Força de mola final F2 aprox. N | 12,5 |
| Força de mola inicial F1 aprox. N | 4 |
| L | 43,5 |
| D | 5 |
| L2 | 7 |
| SW1 | 13 |
| D2 | 21 |
| Curso S | 5 |
| L1 | 17 |
| D1 | M10x1 |
| L3 | 15 |
| Cor dos componentes | vermelho RAL 3020 |
| Tamanho | 1 |
| Forma | D |
| Versão 1 | com ranhura de engate |
| Material dos componentes | termoplástico |
| Denominação | Pino de indexação |
| Chave de aço | 1.4404 |
| Tipo de produto | padrão |
| Contraporca | com contraporca |
| Tipo de forma | com ranhura de engate com contraporca |
