PAK1124.0630884
Indexing plunger TA.3 D1=M16X1, 5, D=8, Form B with lock nut, Hardened stainless steel, Components: polyamide
Estimated delivery: On request
Indexing plungers are used when it is necessary to prevent a change in the locking position due to lateral forces. It can only be moved to another locking position after the pin has been disengaged manually.
The anti-rotation protection ensures that the position of the pin relative to the bush does not change. The chamfered tip allows the pin to disengage automatically due to lateral forces on one side. Loosening the screw up to the mark on the pin allows the engagement chamfer to be rotated by 60°.
Material:
Steel version:
Hardened locking guide pin:
Locking guide pin.
Steel threaded bush.
Stainless steel version:
Hardened locking guide pin:
Threaded bush 1.4305.
Locking guide pin 1.4034.
T-knob in dark grey thermoplastic or traffic red RAL3020.
Version:
Steel version:
Burnished threaded bush.
Hardened, polished and burnished guide pin for locking.
Stainless steel version:
Threaded bush, untreated surface.
Hardened and polished guide pin for locking, untreated surface.
T-knob in dark grey RAL 7021 or traffic red RAL3020
On request:
Special versions.
Accessories:
Spacer rings K0665.
Clamping kits for thin-walled parts K2146.
The anti-rotation protection ensures that the position of the pin relative to the bush does not change. The chamfered tip allows the pin to disengage automatically due to lateral forces on one side. Loosening the screw up to the mark on the pin allows the engagement chamfer to be rotated by 60°.
Material:
Steel version:
Hardened locking guide pin:
Locking guide pin.
Steel threaded bush.
Stainless steel version:
Hardened locking guide pin:
Threaded bush 1.4305.
Locking guide pin 1.4034.
T-knob in dark grey thermoplastic or traffic red RAL3020.
Version:
Steel version:
Burnished threaded bush.
Hardened, polished and burnished guide pin for locking.
Stainless steel version:
Threaded bush, untreated surface.
Hardened and polished guide pin for locking, untreated surface.
T-knob in dark grey RAL 7021 or traffic red RAL3020
On request:
Special versions.
Accessories:
Spacer rings K0665.
Clamping kits for thin-walled parts K2146.
| Material | Stainless steel |
|---|---|
| Finishing | Hardened |
| Thread | M16 x 1.5 |
| F x 30° | 2,3 |
|---|---|
| SW2 | 24 |
| Força de mola final F2 aprox. N | 35 |
| Força de mola inicial F1 aprox. N | 15 |
| L | 77 |
| L2 | 10 |
| D | 8 |
| SW1 | 19 |
| A | 60 |
| L1 | 26 |
| D1 | M16x1,5 |
| B | 18 |
| L3 | 23 |
| Tamanho | 3 |
| Forma | B |
| Versão 1 | sem ranhura de engate |
| Material dos componentes | poliamida |
| Denominação | Pino de indexação |
| Cor dos componentes | vermelho RAL 3020 |
| Tipo de produto | com manípulo em T |
| Chave de aço | 1.4034 |
| Curso S | 8 |
| Contraporca | com contraporca |
| Versão 2 | com manípulo em T |
